I added the Eibach pro lift to my Zone 6” lift

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,526
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
Strange it says it for 2014 and up? Mine is a 2012 do you know if there were any design changes?

I wouldn't order off that page anyway, I ordered mine by length not by how much lift, you can do it all by email or over the phone
 

smoothee

Senior Member
Joined
Jun 6, 2012
Posts
1,321
Reaction score
683
Location
St. John's, NL
Ram Year
2011
Engine
Hemi 5.7
Yeah I'm talking to Spence right now, he said the site is not correct and will work for our years too.
15" should be good for 3" rear lift correct?
 

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,526
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
Yeah I'm talking to Spence right now, he said the site is not correct and will work for our years too.
15" should be good for 3" rear lift correct?

Zone and BDS both use 13" for 3" and 15" for 5" coils but mine never did sit parallel to the ground so I ordered 17" for my 5" coils....so to answer your question yes If I had 3" lift I would get 15".

Don't forget to use coupon Hot Damn for 5% off
 

smoothee

Senior Member
Joined
Jun 6, 2012
Posts
1,321
Reaction score
683
Location
St. John's, NL
Ram Year
2011
Engine
Hemi 5.7
Zone and BDS both use 13" for 3" and 15" for 5" coils but mine never did sit parallel to the ground so I ordered 17" for my 5" coils....so to answer your question yes If I had 3" lift I would get 15".

Don't forget to use coupon Hot Damn for 5% off

Thanks man x2! I would've totally forgot about that!

I have my Hellwig adjustables set to 13" and they aren't parallel with the ground either. So 15's it is.
 
OP
OP
Quick_Shifter

Quick_Shifter

IG: @ak_trucks_pa
Supporting Member
TOTY Winner
TOTM Winner
Joined
Aug 14, 2018
Posts
4,159
Reaction score
3,773
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
Yes the stock links are too short in the kit at 15”, procomps are 17” which is correct for 5” rear but you might need 18” lol
You were right on the money 18" Center of hole to center of hole
 
OP
OP
Quick_Shifter

Quick_Shifter

IG: @ak_trucks_pa
Supporting Member
TOTY Winner
TOTM Winner
Joined
Aug 14, 2018
Posts
4,159
Reaction score
3,773
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
F9CFC5D4-3585-4A28-8F5E-9C77AA234AAF.jpeg
 

GIJoe2010

No sh*t, there I was . . .
Military
Joined
Mar 23, 2014
Posts
1,920
Reaction score
1,495
Location
Killeen, TX
Ram Year
2014
Engine
Hemi 5.7
Looks good. I can't wait to see how that comes out.
 
OP
OP
Quick_Shifter

Quick_Shifter

IG: @ak_trucks_pa
Supporting Member
TOTY Winner
TOTM Winner
Joined
Aug 14, 2018
Posts
4,159
Reaction score
3,773
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
D6752AE2-7B62-4BD9-9A38-BCBE7E33B7A4.jpeg
 

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,526
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
That’s much better now, did you move them to the inside at the top mount like you mentioned?
 
OP
OP
Quick_Shifter

Quick_Shifter

IG: @ak_trucks_pa
Supporting Member
TOTY Winner
TOTM Winner
Joined
Aug 14, 2018
Posts
4,159
Reaction score
3,773
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
That’s much better now, did you move them to the inside at the top mount like you mentioned?
Yes I did, It doesn't specify in the instructions and the images show them on both sides. The shop that did my install decided to put them on the outside and I feel they look more stable on the inside. When I upgrade to a Hellwig swaybar I will know what length to order for the Core 4x4 links. I would like to copy your set up. I really like the procomp brackets and the core 4x4 stuff. I went with zone to get the 5" coil springs in the rear because I did not like the idea of a 4.5" spacer
I will have to get the truck out on some level ground and take some pictures.
 
Last edited:

hodge-xj

Senior Member
Joined
Jun 7, 2013
Posts
2,802
Reaction score
2,354
Ram Year
2006
Engine
5.9 cummins
How's the ride after logging some miles on em??

Sent from my SM-N920V using Tapatalk
 
OP
OP
Quick_Shifter

Quick_Shifter

IG: @ak_trucks_pa
Supporting Member
TOTY Winner
TOTM Winner
Joined
Aug 14, 2018
Posts
4,159
Reaction score
3,773
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
Zero complaints. In full disclosure I bought my truck used and it had quick struts installed on it. So that being said the eibach coils and dampeners are night and day from a quick strut. I am very happy with the ride
 

hodge-xj

Senior Member
Joined
Jun 7, 2013
Posts
2,802
Reaction score
2,354
Ram Year
2006
Engine
5.9 cummins
Right, though I can only assume the quick struts can't be any better or worse than oem. Mine has a spacer and is actually getting worse, so the more I look at our options available the more I really like the whole eibach kit. Just a bit curious as nobody aside from you has em. Literally nothing or nobody on the web.

Sent from my SM-N920V using Tapatalk
 
OP
OP
Quick_Shifter

Quick_Shifter

IG: @ak_trucks_pa
Supporting Member
TOTY Winner
TOTM Winner
Joined
Aug 14, 2018
Posts
4,159
Reaction score
3,773
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
Right, though I can only assume the quick struts can't be any better or worse than oem. Mine has a spacer and is actually getting worse, so the more I look at our options available the more I really like the whole eibach kit. Just a bit curious as nobody aside from you has em. Literally nothing or nobody on the web.

Sent from my SM-N920V using Tapatalk
Yes they are still very new. There are a couple threads on here of guys putting them on with the oem coils. No one has done the full kit yet. You will not be disappointed.
The full kit replaces all 4 coils and dampeners, eibach is the first to do that at a reasonable price for our trucks
 

rwhjr

Senior Member
Joined
May 4, 2018
Posts
912
Reaction score
707
Location
maryland
Ram Year
2017
Engine
5.7
Looks sick and I love that ride height. Makes me either want to swap out and raise the front more but then if need to do something in the back to keep the stance/rake I currently have.

Or if I would just be better off with a 3” BL that will keep my front end geometry good like it is now and call it a day

Love the way yours is looking though!
 
OP
OP
Quick_Shifter

Quick_Shifter

IG: @ak_trucks_pa
Supporting Member
TOTY Winner
TOTM Winner
Joined
Aug 14, 2018
Posts
4,159
Reaction score
3,773
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
Looks sick and I love that ride height. Makes me either want to swap out and raise the front more but then if need to do something in the back to keep the stance/rake I currently have.

Or if I would just be better off with a 3” BL that will keep my front end geometry good like it is now and call it a day

Love the way yours is looking though!
Thank you!
 

SOKY_RAM

Senior Member
Joined
Mar 17, 2016
Posts
457
Reaction score
789
Location
Bowling Green, KY
Ram Year
2021
Engine
6.4
Has anyone added these Eibach springs to 5100's. Thinking about doing this. How big is the strut spacer on the OP's lift? My superlift has a 4" spacer. Trying to do some math here to figure out what setting i would need.
 

Latest posts

Staff online

Forum statistics

Threads
194,640
Posts
2,860,931
Members
154,827
Latest member
Destroyer_Ram
Top