Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
If your mirror doesn't have this camera looking lens under the mirror cover it is not a Smart Beam mirror. All the auto dim mirrors have the small square lens on the back of the mirror to detect ambient light for the mirror dimmer.
There is a way to turn the seat belt chime off so you don't have to listen to that, but the red light will stay on and the evic will show up some.
I looked at these mirrors and in the decsriptions it says that they have the rear camera display. Both my cargo and tailgate cam show up on my 8.4 screen so will these still work?
Yes, you can disable the chime, but the EVIC still shows the Driver Seatbelt Unbuckled error and red warning light.
Yes it will, either way will work just fine. You can roll down with the fob then remote start or remote start then use the fob to roll down.
If you don't have a pc laptop laying around then an android tablet will be your cheapest route!!! I had a laptop so I just use it and it saved me from buying a tablet for the few things I am doing with the app.
That little square on the back is for the mirror dimming, not headlight. Need more of a camera lense and the square sensor.
As I stated all the auto dim mirrors have the small square lens to detect ambient light on the back of the actual mirror for your auto dim mirror function to work properly. It is not for the auto high beam feature. The auto high beam is the other large camera type lens mounted to the actual mirror base that is concealed by the black mirror cover. If you look at the outside of your wife's car through the windshield you will see the square hole in the mirror cover to expose the lens is so it can detect oncoming headlights. If your truck didn't come with the auto high beam feature and your mirror has never been changed you do not have an auto high beam mirror. It is only installed on trucks with the actual auto high beam feature.
Not sure if the share link worked. Using Tapatalk but I also linked Ricks previous post to the known working code sheet. If you mirror doesn’t look like the image he shared it’s not the correct one.
No. I bought my remote start kit off of eBay and I was for my truck. I didn’t know you needed a pin # to program the keys. So know I have no truck.
The only thing you can do for now to be able to start the truck is put the stock RFH hub back in the truck and use the stock keys until you get the pin# The instructions that came with the kit should have explained that the keys needed to be programmed.
