Search results

  1. Tpearson515

    2019 classic warlock 1.5 body lift / level with oem tow hooks

    Just wanted to post here for anyone interested, I had been going back and forth on how I wanted to lift this truck up a little, long story short 2019 classic crew cab warlock Installed 2 inch top strut spacer, 1 inch rear spacer, 1.5 inch zone body lift d9150. My current from fender to ground...
  2. Tpearson515

    Under the rear wheel well liner

    Does anyone know if you can reach the bottom side of the bed rail if you remove the rear wheel well liner, I have a small dent close to the top of the fender was just curious if anyone knew before I pull it off to check next week Thanks! Sent from my SM-N975U using Tapatalk
  3. Tpearson515

    Classic warlock/rebel 1.5 body lift question

    Ia there anyone here that has done this? I have a 2019 classic warlock and wanted to make sure that the zone 1.5 body lift 4x4 would work with this? Any pictures would be great!, mainly wondering about the front and how it will look without tow hooks, the kit number is ZOND9150 i installed this...
  4. Tpearson515

    1.5 body lift with OEM flares install question

    Hey guys, was just curious I installed a 1.5 body lift on my 2015 express that did not come with flares, I ended up installing flares after the lift. My question is I now have a 2019 classic with OEM flares, to anyone that has oem flares and installed their lift , did you need to remove your...
  5. Tpearson515

    2019 Warlock 4x4 bilstein help

    Hey guys, new owner of a 2019 Warlock 4x4 here, I recently had a 2015 blue express quad cab that I loved and put a lot of time and money into. If there is one thing I learned from thst truck it was the top level spacers yes cheap and did what they needed to do at the time ended up costing me in...
  6. Tpearson515

    1/4 or 3/8 before and after wheel spacer pictures

    Wondering if anyone had any before and after pictures? Anything would be appreciated! Sent from my SM-N975U using Tapatalk
  7. Tpearson515

    FOTA Update Failed Please Visit Dealer

    I haven't had much luck searching for this on any if the jeep forums, but wondering if anyone here has seen this message happened on my wife's 2014 Jeep Grand Cherokee, it displays the message then reboots , and is stuck in a reboot loop. I have tried disconnecting my battery and discharging the...
  8. Tpearson515

    How did your shop balance your 33x12.5r20

    Just bought a new set of 33x12.5 r20's, They are falken mt01's my tire shop recommended using the beans to balance these, truck shakes like crazy after 40mph, I am having them re balance today. I've never used the bean bags to balance tires before, should I stick with this or just have them...
  9. Tpearson515

    33x12.5r20 on stock 20x8's tire pressure question

    Hey Guys, Looking to get some new tires. I currently have 275 65 20's looking at some 33 12.5r20 I have the stock 20x8 aluminum wheels now, I run 1.5 spacers. I've called the dealership and they said they will mount this tire, but I'm wondering will I have to adjust the tire pressure at all so...
  10. Tpearson515

    Rear wheel spacers only pictures please!

    Anyone here that is running rear wheel spacers in the rear only? I have 1.5's on all 4 right now but wondering how it would look if I just kept the rears on? Pictures would be great or if anyone has done this Sent from my SM-G955U using Tapatalk
  11. Tpearson515

    Running board rattle noise, newly installed

    Hey Guys Just bought a new set of hoop style nerf bars for a quad cab. I previously had the OEM cab to bed length boards that attached to the nut inserts and the lower weld of the rocker. The new boards I installed secured to the nut inserts and I used two speed nuts that came with the I...
  12. Tpearson515

    Rear wheel spacer only pics please

    Has anyone put rear wheel spacers in only to make the tires sit flush on the bed similar to how the front tires sit? I've had 1.5 hub centric spacers on for all 4 for the past couple years. Thinking of switching it up, wondering if a 1/4 inch spacer on the rear only would do the trick? Any...
  13. Tpearson515

    Bull bar with body lift?

    Any pictures of this, did you have to customize anything? I put a 1.5 body lift on and had to relocate the mounting bracket under there, any advice on this or pictures would be great! Sent from my SM-G955U using Tapatalk
  14. Tpearson515

    Lower Ball Joints replaceable?

    Hey Guys, I was wondering if the lower ball joints on these trucks were replaceable? I have a ripped boot in the right front so I was going to just swap it out, cannot seem to find any information online though? 2015, 4x4 1500 5.7L quad cab Any help would be awesome Thank you Sent from my...
  15. Tpearson515

    Loss of power after update?(no tune)

    Hey guys, I had my exhaust manifold repaired under warranty yesterday. Dealership was great got it in and out all covered done in a day. When I picked the truck up I noticed the time was different and things like the truck doesn't beep the horn when I lock it, almost like the settings were...
  16. Tpearson515

    Power without tune?

    How much hp gain can these truck get without tuning the ecu or does the computer really limit any bolt on performance mod you add to this?, I have a 2015 with 3.21 8 speed, just curious. It sucks the ecu on these trucks are locked. Sent from my SM-G955U using Tapatalk
  17. Tpearson515

    OEM Fender Flares pic request

    Hey guys, Does anyone have a measurement as to how far the oem fender flares come out? I have 275/65/20 on stock wheels with 1.5 spacers and kind of wanted to get an idea as to how much oem fender flares would stick out compared to my wheels. Pictures would be awesome!!! Sent from my SM-G955U...
  18. Tpearson515

    Mini tailgate light bar

    Hey guys, I recently put on a tail gate light strip the one that is roughly 60 inches wired it up and everything, after a few months it stopped working (water intrusion), I'm going to replace it but I've been looking into the 15 inch mini tailgate light bar. Anyone here have this I haven't...
  19. Tpearson515

    Sylvania Halogen ZXE bulbs

    Just wanted to make a post to anyone who was wondering. I just ordered a set of Sylvania ZXE low beams/fogs, total was about 70.00 on Amazon. The first pictures is factory, second the ZXE bulbs, I'm pretty impressed they are alot brighter, and actually do have a hint of blue. The picture does...
  20. Tpearson515

    5 inch exhaust tips

    Any pictures of non OEM flange style tips you guys made work? Where you got them and how you installed them. I really want some, but i would rather not spend the amount they are asking for the OEM style flange online. Thanks! Sent from my SAMSUNG-SM-G930A using Tapatalk
  21. Tpearson515

    Blacked out hemi badge

    How did you guys black out your chrome hemi badge and keep the red lettering? Sent from my SAMSUNG-SM-G930A using Tapatalk
  22. Tpearson515

    Need help finding squeak at rear of truck please!

    So a couple weeks ago I posted pictures of my rear 1.5 spacers with rub marks in them where the coil had been rubbing. I finally removed them thinking they were the cause to what I have been hearing... drove home last night and it is still happening. I can not cause the issue to happen with...
  23. Tpearson515

    4th gen visor

    I saw a 4th gen ram on the way home from work a 1500 with a visor with clearance light set up. Looked awesome. Anyone have a set up like this? Sent from my SAMSUNG-SM-G930A using Tapatalk
  24. Tpearson515

    Squeak from rear of truck found!

    So I have been searching for a squeak coming from the rear end of my truck for the past couple weeks, it has been driving me insane! The squeak would only happen at 30+ mph going over small bumps, I had sprayed everything with white lithium grease and nothing. Finally I decided to pull off my...
  25. Tpearson515

    Blue pearl streak bumper

    Any one with a blue pearl streak ram with out dual exhaust cut out that would want to trade for a bumper with dual exhaust? :)

Latest posts

Staff online

Members online

... and 16 more.
Total: 1,402 (members: 66, guests: 1,336)
Robots: 1,481

Forum statistics

Threads
195,762
Posts
2,874,250
Members
156,673
Latest member
waynewl34

Share this page

Top