Search results
-
DELETE there are to many scammers on here.
delete, to many scammers on here. -
Looking for catless Y pipe for 3.7/4.7
does anyone have a link to one. I see them for the 5.7 everywhere. If not, how hard would it be to make the 5.7 Y pipe fit. Most of the ones i see have the upgraded collector as well. Just none are for the 4.7/3.7 One of my cat are plugging up, and i will not spend the cash to replace a faulty...- nathantc
- Thread
- Replies: 3
- Forum: Engine & Performance
-
2008 ram 3.7 going from 3.55 to 4.56 gear
Well, my "little ram" as i call it, is getting what i think will be the best mod possible for the lil v6 truck with its 33" tires and 20" wheels. Today i just bought an entire rear axle assembly that was fully rebuilt with 4.56 gears in it. gear set has less than 2000 miles on it due to the...- nathantc
- Thread
- Replies: 10
- Forum: Engine & Performance
-
3rd gen alfaobd HELP!!!(2008 ram 1500)
ok so i can control everything thru alphaobd like i stated before, yet if i try and change anything at all i get this message that being said using this same bluetooth adapter, phone, and app i it works on the guys truck down the street (2013 ram 1500) my dads truck (2016 ram 2500), and my...- nathantc
- Thread
- Replies: 3
- Forum: Audio & Electronics
-
Modding with a laptop
ok im looking for some help here. i dont care for any of the "tuners" that i can buy. none do what im wanting to do. that said im trying to figure out how i can get into the programing with my laptop, same as i currently can do on my Freightliner. there are things i want to modify. how can this...- nathantc
- Thread
- Replies: 7
- Forum: Engine & Performance
-
2008 3.7 cylinder 3 misfire
new plugs new coils just replaced all the injectors with the 12 hole Denso 12582704 injectors has not thrown a code since i reset the PCM after the injector swap. idles much better. much more responsive, holds and picks up speed in OD at hwy speeds much better. that said i know it has a lot to...- nathantc
- Thread
- Replies: 3
- Forum: Engine & Performance
-
Denso 12582704 Injectors, who's done it.
looking for feedback from guys who have swaped to the GM 12 hole injector. not sure if they would fit the 5.7 but they will the 4.7 and 3.7 my 3.7 has a cylinder 3 misfire only at idle. new plugs and coils. so im going to swap all the injectors as well. really thinking of these. just can't...- nathantc
- Thread
- Replies: 3
- Forum: Engine & Performance
-
10" android head unit 2008 ram
was a not so fun instal. especially due to the wiring needing a few extra things done. gotta love that garbage can bus posting here to show others how well it fits on the 2008 dash. looks almost OEM- nathantc
- Thread
- Replies: 7
- Forum: Audio & Electronics
-
V6 owners, check this out.
so my truck (photo is signature) had issues staying in overdrive even on flat hwy. was getting consistent 15.5 MPG no matter if i was doing 65 mph or 80 mph. Im still planning on going to 4.56 gears being as im running a 33" tire on 20s. That said today was my first trip to Houston for my CDL...- nathantc
- Thread
- 3.7l mpg
- Replies: 4
- Forum: Engine & Performance
-
anyone near the Houston Tx area. need recommendations.
feel free to inbox me if needed, i don't mind talking on the phone if necessary. anyway my dad is looking for a place to get his 2016 ram 2500 cummins worked on to remove some pesky things. we live in the beaumont area but Houston is the closest area that might have a shop like we are looking...- nathantc
- Thread
- Replies: 2
- Forum: Heavy Duty
-
4" axle flip ONLY???? stock front 2wd
ok so the drop shackles appear to be a waste of time and money. the rear of my truck is a touch over 4" higher than the from when measured from tire to fender. Has anyone here done only the 4" axle flip and left the front alone. i never tow with the truck and im wanting it level. it's just a lil... -
2008 short bed single cab with 2015 longhorn wheels.
Bought it 9-16-2020, already ordered new OEM headlights and grille. Today i picked up some 2015 longhorn edition 20s. they look like they belong there. anyway im happy with the lil 3.7 v6 but i feel 3.55 gear is to tall for the lil guy. any head wind or overpass and it has to kick out of... -
doing an auto to spicer 3053a swap
ok buying the trans this weekend. if anyone is somewhat local to the Beaumont Tx area with an sae 3 flywheel and housing for b series cummins as well as the starter to match id be happy to hear what you want for it. also if someone wants to swap my fairly new 4.10 srw D80 for a 3.55 drw D80...- nathantc
- Thread
- Replies: 15
- Forum: Engine & Performance
-
Headlight housing experience
ok i don't want to keep wasting money buying crap products. i got some knock off sport style lights on amazon because everyone keeps saying they are the end all beat all for 2nd gen truck. that being said my low beams are perfect. but the high beams are in the damn sky. if i adjust them down... -
early 3rd gen custom bumper on 2nd gen
added a new bumper, got rid of the crappy chrome junk. better deer strike protection. not bad for only $100. re paint. make new mounts (was for a early 3rd gen) and done. i like it posted incase anyone else would like an idea of how well they fit. didn't see to many of these done this way... -
SRW to DRW intrest
Ok so i don't need to worry about the bed as i have an 8 foot wide flatbed on my truck already. my question is will a dually wheel bolt on and clear the leaf spring. it's got the D80 srw axle. if this is impossible that really sucks as this entire rear end has less than 10k miles on it. it's...- nathantc
- Thread
- Replies: 0
- Forum: Towing & Hauling
-
1996 2wd 2500 engine cross member BROKE!!!!!!!
has anyone else ever seen anything like this. how can i safely fix it. replacing it would be major as its welded to the frame. welding it also would require pulling the motor and entire front end apart. frame swaps come with their own legal issues. this no matter how i look at it could be a... -
4.7 misfire, need some info
ok so i have fire, just removed the valve cover and made damn sure the rockers and valve are there and moving like they should. in the morning im going to go pick up a new injector and try that if the valves are moving, rockers are in place, and i have fire, what should i look into next if the...- nathantc
- Thread
- Replies: 0
- Forum: Engine & Performance
-
think my 4.7 just blew a head gasket
not even an hour ago while driving steady at only 30mph it started missing on cylinder 1, shut the truck down for a bit. when i started it back up lots of steam out of the exhaust,,, great, pulled the #1 plug, started the engine and yup, lots of water and antifreeze went everywhere. also...- nathantc
- Thread
- Replies: 9
- Forum: Engine & Performance
-
ram 3500 suspension on a 1500 3rd gen
like the title says, i know i can make the dually rear axle fit no problem but will all the suspension from the frame out bolt right up this is not for towing, and its a 2wd i want it so that i can directly bolt the humvee wheels and tires to the truck without the use of spacers and the dually... -
can u id this grille guard on my 3rd gen ram
anyway got this off 5miles and well it took some tweaking to make fit and had to make some of my own brackets (two were missing) there is no markings of any kind on it anywhere and i would like to know who made it so i can order new (unbent and not homemade) mounting brackets. even though i...
Latest posts
-
-
Intermittent power steering problem at slow speed or stopped.- Latest: Harley Harrold
-
-
-
