2011 vs 2014

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

outlaw

Member
Joined
Nov 13, 2013
Posts
65
Reaction score
14
Location
South Carolina
Ram Year
2014
Engine
5.7
So I was looking at a lift kit for my ram and I had a 2011 RAM 1500 a few years ago and I just recently purchased a 2014 RAM 1500. I noticed that some lifts said that they were for 2009-2011 and others said 2009-2015. Was there a change in the suspension from the 2011 to the 2014 models? I have been researching this question most of the day and I have not come up with an answer to my question. I was hoping someone on here might know. Any ideas? All are welcome!
 

jaycabral27

Senior Member
Joined
May 19, 2015
Posts
233
Reaction score
62
Location
Hamilton, Ontario, Canada
Ram Year
2015
Engine
5.7
Biggest issue is upper control arm ball joints popping out with levelling kits. Most people that lift or level them end up installing aftermarket zone or mevotech ucas. If your levelling look into bilstein and a better Uca. Lots of threads on this site about lifting.

Sent from my SM-G900W8 using Tapatalk
 
OP
OP
outlaw

outlaw

Member
Joined
Nov 13, 2013
Posts
65
Reaction score
14
Location
South Carolina
Ram Year
2014
Engine
5.7
jaycabral27, I could see that potentially happening. The main thing I was curious about was if something listed for a 2011 would fit on a 2014. I can't find what I was looking at earlier, but I did find 3.75in Combo Lift Kit for 09-11 Dodge 4wd 1500 Ram [352] | Rough Country Suspension Systems® which is listed for only years 2009-2011. I was curious why something listed like that wouldn't fit another year model as well. As far as I knew, they were the same underneath. You know what I'm saying?
 
Back
Top