mda_az
Junior Member
- Joined
- Jun 7, 2017
- Posts
- 8
- Reaction score
- 15
- Ram Year
- 2017
- Engine
- V8
Hello All,
Just wanted to post some before and after pictures of my recent modification. I don't post much as I normally come on here for research purposes only. I don't have much knowledge with working on vehicles. I am posting pics to help those who are looking for something similar to my setup as I found it very difficult to find any pictures with what i wanted. After all the nerves and anxiety I think it came out amazing. I had some Nitto Ridge Grapplers installed on Monday 275/65R20. That is what the tire store recommend as I was planning to go with the 285/60R20. I"m glad I listened. I had the Bilstein's installed today (Tuesday) which gave me a day to see how it drives pre and post. I think it drives better post with the smoothness of the ride. Also the tires did not rub pre install. I was planning also to go with the Bilstein's set at 2.1 but changed last minute to 1.4 as I wanted some rake and rather have some rake than look level. What is odd is I had about 3 inches of rake before the tires and when I measured this morning I had about 2 inches. So I went back and forth about what setting to do as I didn't have much time to do any research why the rake went down. So I ended up going 1.4 and I have about 1.25 inches of rake post now. Maybe I can't measure right ha. The wheels are Black Rhino Attice 20x9.5 with a 0 offset.
Just wanted to post some before and after pictures of my recent modification. I don't post much as I normally come on here for research purposes only. I don't have much knowledge with working on vehicles. I am posting pics to help those who are looking for something similar to my setup as I found it very difficult to find any pictures with what i wanted. After all the nerves and anxiety I think it came out amazing. I had some Nitto Ridge Grapplers installed on Monday 275/65R20. That is what the tire store recommend as I was planning to go with the 285/60R20. I"m glad I listened. I had the Bilstein's installed today (Tuesday) which gave me a day to see how it drives pre and post. I think it drives better post with the smoothness of the ride. Also the tires did not rub pre install. I was planning also to go with the Bilstein's set at 2.1 but changed last minute to 1.4 as I wanted some rake and rather have some rake than look level. What is odd is I had about 3 inches of rake before the tires and when I measured this morning I had about 2 inches. So I went back and forth about what setting to do as I didn't have much time to do any research why the rake went down. So I ended up going 1.4 and I have about 1.25 inches of rake post now. Maybe I can't measure right ha. The wheels are Black Rhino Attice 20x9.5 with a 0 offset.