BigOlKy
Junior Member
I had a cam shaft that eroded and was misfiring. after replacing the cam, lifters, and the timing chain I had gotten the misfire to go away. started it up and it had some obvious issues (Rough idle, sputtering rpm, died after a few seconds). I assumed I had made a timing mistake so I took the front cover off and retimed it for sure this time.. started it up and now it will start well and then slowly die since it won’t idle. I had two codes which are P0480 and U1428. Checked my fuses and looked over everything i had previously done (wires and hoses) and can’t find anything wrong. Any suggestions? I have a video from the first start but it won’t let me link it.