2019 suspension lift questions

[Alloway]

The 35 in that picture only looks a hair bigger than the factory duratrac and the 37 dwarfs the 35

 

[Alloway]

What Brand is the 37 and 35 in that picture?

 

[crazy jerry]

35 is mastercraft (cooper). definatly on the narrow range of the scale for sure. got another brand 35x12.5 and its easily 3/4" wider. 37 is maxxis

 

[Gary Moore]

I'm pretty sure if you get the right wheel and tire combination (wheel offset) you can stuff 37s on stock suspension or with only a two inch front level.

I have 22x35x12.5 with 2" front lift

 

[Ubem]

I am running 37x12:50x20 Nitto Trail Grappler tires on my 2019 Ram Big Horn Gen 5 on Fuel Hardline 20x9 rims with a +1 offset and a 6 inch Pro Comp lift kit. The lower splash guards on the rear edge of the front fenders had to be trimmed and the only problem I encountered with tire rubbing was contact with the rear lower edge of the front fender liners when turning and hitting a bump in the road. This was eliminated by installing a small section of Delwin rod in the recess section of the lower rear portion of the front fender liner. The rod was then attached to a medium sized spring inserted through the back side of the liner and then attached to an inner body bracket as shown in the attached pictures. This installation pulled the liner back approximately 2 inches and eliminated any further tire rubbing contact.

 

[crazy jerry]

thats sharp truck. spring idea sounds good

 

[pwjouster]

i almost made the assumption that was factory with the fit and finish there.
very interesting idea there.