22x14s

[beasTEX]

Okay guys need some help. I currently have a 6in zone off-road lift on my 2010 Dodge Ram. It's a 5 speed with 3.55s. I want to run 22x14 octanes with 35s. I would love to run 37s but of course I don't want to buy another tranny anytime soon since I have 3.55s right now. But I plan to regear later on down the road. Question is how much of a body lift do I need to add to clear 22x14s with 35s? And once I regear what will also clear 37s? And is my 5speed tranny a factor also? What would be a good gear ratio to swap with? How much would I be looking at to swap my gears?

 

[jadocs]

Wheel size is irrelevant if you're talking about height. 35's are 35's regardless of what wheel they are on. The only difference is the tire profile on 22's.

 

[Wandell]

He wants to run 14 inch wide wheels, which is a huge issue. You will need more lift than someone running a 9 or 10 inch wide wheel. I think you should go ahead with a 3 inch body lift. Even with that, you may need to add a leveling kit or adjustable coilovers to fit 37's.

 

[Rzrman328]

Ya I'm runnin 20x12 -44 and with a 6" alone, 37x13.5 were rubbing bad. I had to mod my lower valance and front bumper a bit and mold/push in my wheel wells. Pretty sure you'll be doin the same if not more.

 

[beasTEX]

Well I plan to run 35s starting out. So it would be 22x14s on 35s. Do yall think a 1.5 body lift with bils maxed out will clear it?