Kurtis West
Junior Member
07 ram 1500 5.7 4x4
Last summer I replaced the blower motor resistor/relay on the blower motor due to intermittent issues of not activating the AC.
About a week ago while driving I realized my AC turned off. Yet it was still in the fan speed 2 position.
Fan speed 1 and 2 the AC, heater etc doesnt run. When in 3 and 4 it does but 3 doesn't blow as cold as before.
I replaced the relay with a STP branded one and has worked decent. I tried the smack test to no avail.
Could it be the relay is going out again or is it possibly the blower switch panel itself?
Last summer I replaced the blower motor resistor/relay on the blower motor due to intermittent issues of not activating the AC.
About a week ago while driving I realized my AC turned off. Yet it was still in the fan speed 2 position.
Fan speed 1 and 2 the AC, heater etc doesnt run. When in 3 and 4 it does but 3 doesn't blow as cold as before.
I replaced the relay with a STP branded one and has worked decent. I tried the smack test to no avail.
Could it be the relay is going out again or is it possibly the blower switch panel itself?
