AF vs SilverBullet Showdown

[AF_Hemi]

You don't have to take anything out. You have access to the crankbolt easily from underneath. Its really nit that's hard to do with all the plugs in. Requires like 50 lbs of force or so.

 

[sawcut64]

There is another way that I don't recommend because most all the times I had a pushrod pop after it was started was by doing it this way. You can remove the connections from the coil packs and injectors, or pull the fuel pump fuse and crank the motor and see if the rockers move.....like I said though I don't recommend it.

 

[Silverbullet08]

code i got this morning
P2299 - Brake Pedal Position/Accelerator Pedal Position Incompatible

 

[KGBIGCOUNTRY]

^^^That code is from 2 footing it to keep it from stalling, I got that on mine once.

 

[KGBIGCOUNTRY]

The computer sees both the brake and throttle are pushed and being worked togther and throws it retared if ya do it enough.

 

[Silverbullet08]

ok that fine. just got all the coils and plugs out. time to pull the covers...

 

[Bigtman07]

Keep us updated nick.

 

[truckin151]

good luck bullet

 

[Silverbullet08]

how do u ge3t off that grounding wire on one of the bolts on the covers? just with pliers?

 

[Off_Road_Teacher]

how do u ge3t off that grounding wire on one of the bolts on the covers? just with pliers?

Pliers or by hands. Just turn it back and forth while pulling up.

 

[Silverbullet08]

driver side is off. everything looks normal from what i can tell

 

[0212353]

post a pic for the experts? (not me, just thinking out loud here)

 

[Silverbullet08]

i cant for the life of me get the back two bolts on the passenger side. that wiring harness wont unclip too....

 

[Laramie1997]

I second JJ. TAKE PICTURES!

 

[sawcut64]

i cant for the life of me get the back two bolts on the passenger side. that wiring harness wont unclip too....

It's a real ***** to remove, what I normally do is use a flat pry bar and wiggle it with my hand until it pops loose.

 

[Silverbullet08]

ok pics are on my facebook. if someone could copy them over to here i would appreciate it

 

[Laramie1997]

Bah. Guess I'm the geek who will do it real quick.

DRIVER'S SIDE

 

[Silverbullet08]

well they all move freely. so its not the pushrods....

 

[Bad Habit]

pushrods check...

 

[Off_Road_Teacher]

**** man, I was hoping it was going to be something easy like a push rod.