AlfaOBD

[STecoD]

Has anyone successfully programmed a key fob with the current 2.1.6.9 version? I would like to know that's it's working before I use the erase ignition FOBIKs procedure because it erases all of the FOBIKs including the one you just used to access the system so if you can't immediately program a new FOBIK, you're screwed.

I programmed one today. It was the Highline system.


Sent from my iPhone using Tapatalk

 

[Macmechanic]

I programmed one today. It was the Highline system.


Sent from my iPhone using Tapatalk

STecoD, "Highline system" as in the Keyless Enter-N-Go push button to start type?

 

[STecoD]

STecoD, "Highline system" as in the Keyless Enter-N-Go push button to start type?

That is correct. It is also the one guys were using when the Basline one was broke a couple updates ago.


Sent from my iPhone using Tapatalk

 

[keepemrollin14]

Anyone in Oklahoma city or Albuquerque? Passing through and need to see if my android tablet will connect now to an 18’ Ram.


Sent from my iPhone using Tapatalk

 

[diboblo]

Anyone in Oklahoma city or Albuquerque? Passing through and need to see if my android tablet will connect now to an 18’ Ram.


Sent from my iPhone using Tapatalk

It's not a limitation of the tablet OS, but a security feature of the 18÷ vehicle... so probably not, if you don't have a bypass harness.



Sent from my SM-G955U using Tapatalk

 

[keepemrollin14]

I just wanted to see if it will connect really on any obd so I can make sure its setup


Sent from my iPhone using Tapatalk

 

[likes2build]

Passing through those cities sounds like you might be on I40. If you're heading west into AZ or CA then I might be able to help.

 

[keepemrollin14]

Passing through those cities sounds like you might be on I40. If you're heading west into AZ or CA then I might be able to help.

Ill be in Albuquerque later today and vegas the following. Heading down I40


Sent from my iPhone using Tapatalk

 

[likes2build]

You'll be passing a few miles from me on your route, PM sent

 

[g-ram]

Delete

Sent from my SM-N950U using Tapatalk

 

[Lawsuit11]

Delete

Sent from my SM-N950U using Tapatalk

It’s the same thing except instead of inserting the fob in the ignition. Just set it on top of you center console of your truck. Run the program like normal


—2018 Ram 1500—

 

[g-ram]

Thanks

Sent from my SM-N950U using Tapatalk

 

[Alexx]

There was an update today i thought that would work on the mileage correction for the 7 inch but still nothing

Sent from my SM-G955U using Tapatalk

 

[them0difier]

Has anyone used the zautomotive bypass module instead of the security bypass harness on a 2018 when trying to make changes with the alfaobd?


Sent from my iPhone using Tapatalk

 

[78Staff]

Delete

Sent from my SM-N950U using Tapatalk

@g-ram Just a friendly comment - it's generally frowned upon to delete your questions, as it prevents other from learning as well.

 

[Mpgrimm2]

Has anyone used the zautomotive bypass module instead of the security bypass harness on a 2018 when trying to make changes with the alfaobd?


Sent from my iPhone using Tapatalk

It should also work (similar concept). Just costs more, requires removing the dash/radio & takes longer to install.

M² Mods.

 

[them0difier]

It should also work (similar concept). Just costs more, requires removing the dash/radio & takes longer

Thanks for the feedback


Sent from my iPhone using Tapatalk

 

[likes2build]

I like my M2mods bypass as it's really easy to remove when I take my truck in for service. I don't know if the dealer would spot it or say anything but I'm not taking any chances. Plus I like to spend my $ here with the forum vendors that support us and pay to advertise here.

 

[Jeffnc84]

Hey everyone. Looking to add ventilation seats to my big horn. Have already activated them to where the option pops up in the 8.4. But the buttons are not lite up on the switch panel. Any ideas how to turn them on? Tia


Sent from my iPhone using Tapatalk

 

[Austen]

There was an update today i thought that would work on the mileage correction for the 7 inch but still nothing

Sent from my SM-G955U using Tapatalk

I thought you could change the mileage already with Alpha OBD?