And ofcourse i gotta problem i think....

[LoadedExpressRam]

So i installed a aFe diff cover on my 2014 1500CC RWD and the amount of space between it and my Core 4x4 panhard bar is very minimal. I mean i can probably get a piece of paper through the gap. My problem, or maybe not, is this ok? I know they make a curved bar which i may get but wasnt sure if i can even drive the thing like this. As always appreciate the help.

 

[crazykid1994]

You can test the suspension. Disconnect your sway bar and lift the axle on the passenger side and see if the track bar makes contact. Also look up banks diff cover on YouTube.

 

[Khanaar]

You can test the suspension. Disconnect your sway bar and lift the axle on the passenger side and see if the track bar makes contact. Also look up banks diff cover on YouTube.

Do they make these for the 1500 axle? Actually on that thought, what axle does our half ton trucks have anyway?

 

[crazykid1994]

Do they make these for the 1500 axle? Actually on that thought, what axle does our half ton trucks have anyway?

Couldn’t tell you if they do or not. Was more aimed to educate people on how different diff covers function. Or trucks have a 9.25 rear axle. Pre 2013 is a corporate 9.25. After 2013 is a zf 9.25

 

[LoadedExpressRam]

You can test the suspension. Disconnect your sway bar and lift the axle on the passenger side and see if the track bar makes contact. Also look up banks diff cover on YouTube.

Appreciate the info and help

 

[Wild one]

Couldn’t tell you if they do or not. Was more aimed to educate people on how different diff covers function. Or trucks have a 9.25 rear axle. Pre 2013 is a corporate 9.25. After 2013 is a zf 9.25

Actually it's after 2010,the 2011's for the most part came through with the ZF 9.25