Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Not likely....you would need to crawl under the truck and see how many wires are at the connector that is at the centre tailgate to bed transition area. If you only have 2 wires, then best bet is to get the entire install kit (which has a replacement in tailgate harness with a camera connector). If you have 6/8? then you might already have the required wiring.
I'd say it's very likely. Everybody I know of who has added the camera, even if they had no other portion of the wiring, had the part in the tailgate (if they had the lock).
The plug itself is the same BUT the wire are not there. If you go with a factory back up cam kit you have to re-pin that harness and also re pin to the bcm and radio
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
There are two different harnesses inside the tailgate for the camera , the larger of the two harnesses do in fact have the camera wires 6ea and 2ea for the lock .
The kit comes with this harness as well . So you'll have an extra one .
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.