Bed rails

[Jak259]

Does anyone with a newer ram that has the plastic top bed rails notice if the back have the holes plugged? I have a '14 and I notice the front holes are plugged but not the back. I had the dealer install a bedliner they owed me and now I'm wondering if they had to take them out and forgot to put them back.


Sent from my iPhone using Tapatalk

 

[Danimal77]

Nope...rear ones are open.

 

[NYCruiser]

Yup. Mine are the same way.

 

[Jak259]

Huh. Yeh I'm not liking that. After the rust problem the third gens had in the rear wheel wells. I don't want NO water down there lol. I'll have to see if the dealer or Anyone sells the plugs. I'll be putting a tonneau on soon hopefully it'll cover the holes but I'd like them to be plugged too.


Sent from my iPhone using Tapatalk

 

[NYCruiser]

Keep the wheel wells clean. Make sure no mud, leaves, etc accumulate behind the well covers and all should be good


Sent from my iPhone using Tapatalk

 

[wibble]

http://bit.ly/1dFz7LX

I bought these and they work good.

 

[Jak259]

http://bit.ly/1dFyGBt


I bought these and they work good.

I was just looking at those. Do you think they would interfere with the tonneau rails sitting flush?
Those plugs look like they don't go flush like the oem front plugs


Sent from my iPhone using Tapatalk

 

[Jak259]

Keep the wheel wells clean. Make sure no mud, leaves, etc accumulate behind the well covers and all should be good


Sent from my iPhone using Tapatalk

Yeah I'll def be doing that. When I sold my 05 it had just got its first paint bubble(rust) over the wheel well. So now I'm a freak about keeping the wells clean


Sent from my iPhone using Tapatalk

 

[wibble]

I was just looking at those. Do you think they would interfere with the tonneau rails sitting flush?
Those plugs look like they don't go flush like the oem front plugs


Sent from my iPhone using Tapatalk

They aren't flush. My cover mounts on the inseam of the bed so mine were still exposed. Iv seem some covers that actually use those holes for mounting the cover. I guess it depends on what you go with, but these probably wouldn't work well with a cover that has to go over them.