bull bar

[tncruiser]

planning on installing a bull bar on my 2015 express,have done a search and found no clear answer
my QUESTION
dOES ANY ONE MAKE A BULL BAR THAT DOES NOT REQUIRE UTTING OR DRILLING IN THE FASCIA ???
thanks
brianj

 

[stimpy433]

I've never seen one.... all the ones I've looked into about installation mount the same and require removal/cutting of the lower fascia.

 

[tncruiser]

I've never seen one.... all the ones I've looked into about installation mount the same and require removal/cutting of the lower fascia.

thanks, while not what I was hoping to hear facts are appreciated hope more/better answers follow

brianj

 

[Thumper2016]

We've got the Luverne Bull Bar on our 2500 CTD,
it mounts using the front mounts on your tow hooks.

You don't loose the use of your tow hooks.

https://www.realtruck.com/bull-bars/luverne/R205262.html?gclid=CMykrdil884CFUYehgod4QwDWA

 

[Ox69]

I cut mine where the bull br was to make a clean look

 

[hoe...]

Ha ha, that's not a bull bar....

Sent from my SM-G935F using Tapatalk

 

[Warren5]

Rough Country i think does

 

[Adum12]

I really like thr looks of the rough country bull bar. It shows fitment up to 2014. I contacted RC asking what changed that it won't fit 2015. Got a reply saying they cannot confirm fitment since they haven't had a truck to test fit one on.

 

[SitKneelBend]

If I'm not mistaken,most don't require that you cut it but rather remove the lower black plastic air dam. You can cut that easily replaceable piece or leave it off entirely. They mount to the tow hook mounting locations and a good kit will come with brackets to be used with or without tow hooks.

In other words, they don't go through the fascia, but from under the fascia.

Sent from my HTC One M9 using Tapatalk

 

[SitKneelBend]

Here's a pic of my bar if you remove the lower fascia and cut holes for the bar to come through. I have more if you need more clarification...



Sent from my HTC One M9 using Tapatalk