Can I install some JBA long tubes from an srt8 challenger on a 2013 Dodge ram RT?

[bigee444]

So it seems that JBA stopped making long tube headers for the dodge ram rt with a 5.7 liter engine. I can however find the JBA long tubes that fit the 392 srt challengers and chargers. WIll these fit and if they do, what kind of modifications are needed? I would be taking these to a muffler shop to install them so they would be welding on mid pipes and exhaust pipe after the headers. I guess the main thing is will the headers bolt right up to the heads and will there be any clearance issues or fitment issues????

 

[G-Ride990]

Curious why you would want to attempt this? I got my ARH long tubes from [email protected] for a deal you wouldn't believe. And they were made for my truck.

Do you have a set of Chally long tubes sitting around or something?

I highly doubt they would fit but I can't tell you with 100% confidence.

 

[bigee444]

Curious why you would want to attempt this? I got my ARH long tubes from [email protected] for a deal you wouldn't believe. And they were made for my truck.

Do you have a set of Chally long tubes sitting around or something?

I highly doubt they would fit but I can't tell you with 100% confidence.

No I dont have any sitting around but I can get them very easily and they are not super expensive. I happen to like JBA because I have had good luck with them before.

 

[Wild one]

I have JBA longtubes on both the truck and the wifes 1320,physically they'll bolt to the heads,but whether they'll fit the truck i wouldn't know,and i'm not sure you'll find to many guys who would know

 

[bigee444]

I have JBA longtubes on both the truck and the wifes 1320,physically they'll bolt to the heads,but whether they'll fit the truck i wouldn't know,and i'm not sure you'll find to many guys who would know

What vehicle are your jba meant for though???

 

[Wild one]

What vehicle are your jba meant for though???

Both are vehicle specific,i put JBA truck long tubes on the truck back in the spring of 15,when they were still easy to get.

 

[MADDOG]

The port sizes and shapes on the SRT 6.4L heads are different than what you find on 5.7L heads. The 5.7L gaskets will either block part of the 6.4L exhaust port or, if you use the 6.4L gaskets, the port differences result in exhaust gases bypassing the ports for an instant exhaust leak.

If you want to go to headers, get some that specifically fit your truck's 5.7L and save yourself a significant hassle.

 

[Bigskyroadglide]

These are popping up more and more

TSP 09-18 1500 Dodge Ram 2" Primary Stainless Steel Long Tube Headers

Texas Speed Dodge Ram 1500 Stainless Steel Long Tube Headers

www.texas-speed.com

 

[bigee444]

These are popping up more and more

TSP 09-18 1500 Dodge Ram 2" Primary Stainless Steel Long Tube Headers

Texas Speed Dodge Ram 1500 Stainless Steel Long Tube Headers

www.texas-speed.com

I actually just started seeing these today the more research I did. They seem to be good quality and a good deal. I have seen a few videos on Youtube as well.