Confirming Tire Size OK

[Kapt]

My 2016 Eco with a 2" leveling kit will be OK with 33/12.50/20 tires as long as I use a 1/4" spacer on the front. Right? Just confirming this before I buy them

 

[bchap05]

You can run 35s with a level so I'd assume they fit fine. Unless ed changes something I'm unaware of

 

[Kapt]

Thanks for the reply

 

[OnSale]

My 2016 Eco with a 2" leveling kit will be OK with 33/12.50/20 tires as long as I use a 1/4" spacer on the front. Right? Just confirming this before I buy them

I'm running 20x9 rims with 33x12.50 M/T tires with no lift or level. Stock suspension. No rubbing or hitting on any parts in the wheel well.

I was shocked they fit without spacers or a level kit. But they do.

Sent from my Grand XL using Tapatalk

 

[Eric raugust]

I have a 3” lift on my 2014 Dodge Ram 1500 and just wondering if a tire with a true size of 36” will fit on stock 17” rims


Sent from my iPhone using Tapatalk

 

[Kapt]

I'm running 20x9 rims with 33x12.50 M/T tires with no lift or level. Stock suspension. No rubbing or hitting on any parts in the wheel well.

I was shocked they fit without spacers or a level kit. But they do.

Sent from my Grand XL using Tapatalk

I went and got spacers. I wasn't paying attention and got the wrong ones. So now I have 33/12.50/20 on my truck with the 2" level, and no spacers. It's close, but everything clears

 

[Kapt]

Even though everything cleared, I got the correct spacers and put them on today. While nothing was rubbing it was extremely close. Ease of mind makes adding the spacers worthwhile I think

 

[Eric raugust]

got the 37’s mounted up on the truck and ZERO RUBBING [emoji16][emoji16]


Sent from my iPhone using Tapatalk

 

[revitupmoto33]

Should be fine without wheel spacer, those things are no bueno! I’m running 305/70/17 (34.5”) on 2.8 bils, even at 2.1 only had slight rub on the plastic liner when reverse at full lock