crzetex
Junior Member
- Joined
- Apr 16, 2014
- Posts
- 13
- Reaction score
- 5
- Location
- South East Texas
- Ram Year
- 2012
- Engine
- 5.7 Hemi
Greeting all!
I have a 2018 Lonestar with the 8.4 UAS and base 6 speaker system. Today I started replacing the back door speakers with 6.5" coaxial.
I did not use adapters for the speaker lines, and did splice into the factor wires. I check for polarity and wired up the new speaker leads. When I checked the speaker I get no sound. The new speaker is 4 ohms like the factory speaker. I also undid the new wiring and reattached the factor connector and again no sound. I went ahead and did the passenger with no issue.
Any Idea what the issue could be?
I also put the aftermarket speaker back and again no change.
Thanks in advance for any replies.
I have a 2018 Lonestar with the 8.4 UAS and base 6 speaker system. Today I started replacing the back door speakers with 6.5" coaxial.
I did not use adapters for the speaker lines, and did splice into the factor wires. I check for polarity and wired up the new speaker leads. When I checked the speaker I get no sound. The new speaker is 4 ohms like the factory speaker. I also undid the new wiring and reattached the factor connector and again no sound. I went ahead and did the passenger with no issue.
Any Idea what the issue could be?
I also put the aftermarket speaker back and again no change.
Thanks in advance for any replies.