Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sorry to hear, are they backorderd now like the 6112's ? damn...My kit is backordered till March 29th so as of now I'm looking into other options once i get a refund for this kit
Sent from my SM-N920V using Tapatalk
I like where your heads at @2010 Infantry Vet
I think we’re all curious about these springs in combination with the Bils set on the 3rd or 4th ring and seeing where the CV angles are. As soon as someone does this I hope they report so we can all know if we can proceed with or without extra lift (beyond Eibach recommended) with this setup, as well as it will lay a path for different spring/shock combos that won’t detrimentally affect CV angles but overall increase lift.
Sorry to hear, are they backorderd now like the 6112's ? damn...
Has anyone done the full kit at 3.5 yet? Interested in the CV and uca angles. The more I think about it the more I'm thinking the full kit set to 3.5 and adding a 1.5 spacer in the back to keep some rake but it will depend on the angles.
I don't have any Eibach parts, so I can't answer your specific question. But I just wanted to make sure you're aware that Eibachs rear spring provides a 1" lift - which may be a better option than the 1.5" spacer if you're ordering Eibachs front components. I'd like to see someone do the full front & rear Eibach kit at 3.5"/1".
I am but do like some rake and I think going all the way to 3.5 will make it negative rake with only the 1 inch. Doing a spacer will bring it to 3.5 and 2.5, roughly where I am now but with a better ride and safer components (3 inch front 2 inch rear spacers at the moment) regardless the spacers have to come off and I will be buying the full kit would just like to get as much out of it as possible but safely also
Yeah the one question I do have and need to call on is will the rear shocks be long enough to accommodate the extra spacer. I would assume yes because it's only 1.5 but will be trying to find out first. I dont mind waiting for the back order seeing is they wont be going on until spring when the snow is gone probably sometime end of April.Ah, understood. I thought you were just looking at 3.5" in the front with Eibach, then a 1.5" rear spacer (by itself) in the rear. But, you're actually wanting lift of 3.5" front/2.5" rear - sorry for my confusion.
Yeah the one question I do have and need to call on is will the rear shocks be long enough to accommodate the extra spacer. I would assume yes because it's only 1.5 but will be trying to find out first. I dont mind waiting for the back order seeing is they wont be going on until spring when the snow is gone probably sometime end of April.
I’m seriously considering doing just a set of coils with a set of rear (extended) shocks after Christmas. Maybe @Nick@GotExhaust can set me up.
. . . It is only an extra half inch.