Error code 20

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lammie

Junior Member
Joined
Mar 5, 2023
Posts
2
Reaction score
0
Location
Nova scotia
Ram Year
2020
Engine
5.7 Hemi
Hey guys new to the group, .aybe I'm not looking in the correct place but I can't find a answer to this.

I have a 2020 1500 limited, last night through screen told me it was going to do a update ,shut truckoff and it will do it over night. Anyhow this morning I was greeted with " update failed error code 20 see your dealer" any advice would be appreciated.
 

woojyee

Senior Member
Joined
Jan 2, 2015
Posts
315
Reaction score
91
Location
Nebraska
Ram Year
2022
Engine
Hemi 5.7 eTorque
You can disconnect the battery for a while and see if that clears it, otherwise you might have to take it a dealer as the update failed.
 

Bourgeois

Junior Member
Joined
Dec 22, 2020
Posts
26
Reaction score
10
Location
LA
Ram Year
2019
Engine
Hemi
Uconnect told me it's a firmware failure. A common issue that will replace the entire radio free of charge
 

karmirith

Junior Member
Joined
Oct 1, 2024
Posts
14
Reaction score
14
Location
Utah, US
Ram Year
2018 RAM 1500 Limited
Engine
Hemi 5.7
Hey guys new to the group, .aybe I'm not looking in the correct place but I can't find a answer to this.

I have a 2020 1500 limited, last night through screen told me it was going to do a update ,shut truckoff and it will do it over night. Anyhow this morning I was greeted with " update failed error code 20 see your dealer" any advice would be appreciated.
Were you able to get this fixed, Error 20 is a problem with the Sierra Wireless Card. If you're willing to open up the radio, it's the card on the side of it. You'll most likely need to purchase a new card for it to work correctly and then you can update your system.
 
Back
Top