Gatling Gun 2.0 mounting

[Tonyhawk196]

I just got my headlight projectors in last night and i was looking at the shrouds i bought and pretty much figured out how they mount BUT what i'm not sure about is if you are supposed to glue everything together or not. My set up is as follows: morimoto mini H1 projectors, Gatling Gun 2.0 shroud and the concentric ring what conects the two. Do I glue these all together or will they stay together with compression alone?

Thanks

Andy

 

[Texasez]

JJ will probably chime in but on my projectors the cover screwed into the projector with four screws. Then the projector had the rubber ring between it and the light housing.

 

[Texasez]

I found out too late to use the bigger of the rubber washers.

 

[0212353]

The mini gatlings screw in, but the others don't

Tony - I epoxy the centric ring to the shroud (couple dabs just to hold it on there), then epoxy the shroud to the projector. This ensures that it won't fall off 2 weeks later.