Got my S&B CAI installed now for some 1.7HS

[directconnection189]

Yea I will deff post up some pics and my time card for doing it hopefully I can do them this weekend, and that's not to big of a problem my work just paid for a full tank so I'll be set

 

[the codes]

Id really appreciate a write up of any sort...might give me the confidence I need to install mine myself when I get around to it..

 

[WhiteExpress]

If anyone is worried about high miles, just freshen up the top end while you're in there.
A set of springs and lifters won't be THAT much more. Hell get some stiffer springs so you can rev it up to 6500! (Ok, that might give you a reason to worry about miles)

 

[directconnection189]

So easy a cave man can do it, these rockers were a piece of cake to do took 3.5 hours and a couple of beers just waiting to take it out for a spin now I had a rusted bolt break off from the water pump and that is damping my time. But the hardest part of installing these were pulling the stupid plastic spark plug wire holders on the valve cover bolts that would not come off very easy

 

[Okiespaniel]

Nice job!
I am curious if the rockers cleared your stock valve covers without smashing them with a hammer.

 

[directconnection189]

No I didn't run into any clearance issues

 

[the codes]

man sure would be cool to get some valve covers with a pyrex or whatever glass inserts on em so you could see those beauties...


Tapatalk Addict

 

[directconnection189]

yea I was gonna go ahead and buy some aftermarket valve covers but I figured I would just save the money for a better mod

 

[talon6]

glad you got them in. and i donnt know why some people had clearence issues. i never did. now go out and enjoy.