Hides and pilot lights

[SIhemi]

Installed my hid kit from retro shop. I also put in pilot LEDs for tail lights,turn signals and license plate lights. Everything works. Install was a breeze. I'm getting a msg that the tail lights r out and one of the turn signals is out. It's also flashing faster than normal like a bulb is out. My question is there anything I could do to stop the msg and fast flashing. Thanx for any info. Will post pics later.

 

[Ocelot]

The LED tails probably need a load resistor. The LEDs draw much less current and the computer sees the lack of current being used as a burnt out bulb.

Ray

 

[SIhemi]

Is it hard to add a resister to the lights? Do u add to the wires or bulb it self? Sorry for all the questions new to this. Thanx

 

[Ocelot]

Is it hard to add a resister to the lights? Do u add to the wires or bulb it self? Sorry for all the questions new to this. Thanx

take a look at this thread. It's for a 2013, but it should be similar.

http://www.ramforum.com/f75/how_2013_led_tails_into_4th_gen-28188/

 

[SIhemi]

Thanx for the link. Looks like just what I need.