t0ymach1n3
Senior Member
Anyone ever got the message below when programming a "new" key fob? The battery in the fob is from a known working fob, all of the directions at the start of this thread were followed and all the wiring double checked. I suspect the "new" fob I got off eBay was either used (can't find a way to validate this on my own) on another truck or it's faulty. I can hold it to the push to start button and the EVIC tells me it's not programmed. I also made sure to get everything but my tablet out of the cab of my truck to avoid any possible interference.
"Key Programming Procedure Failed
Programming Step: Waiting for key"
"Key Programming Procedure Failed
Programming Step: Waiting for key"