Lifted 4th Gen Pics - Show Em Off!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Farmingdales Finest

Senior Member
Joined
Jan 6, 2016
Posts
104
Reaction score
68
Location
The Jersey Shore
Ram Year
2025 Ram 2500
Engine
Hemi 6.4L
Stock height, brand new 275/65R20s Cooper AT3 XLTs. Debadged.
View attachment 534694
View attachment 534695
View attachment 534696

Bilstein 6112s @ 2.8” and ReadyLift UCAs front, Bilstein 5100s and MotoFab 1.5” spacers rear. Still have 1 1/8” of rake which is about what I was aiming for. (Some Icon 1.5” rear coils on the way.)
EDIT: Measured again after alignment, rake is closer to 1 1/2". The 2.8" seems to have net'd only about +2 1/2" in the front only a day after install--so, I expect it will settle even a bit lower. Regardless, I like the way setup looks now. I may add a 1/2" spacer on top of the struts once Icons are swapped in for the rear spacers depending on where everything settles.
View attachment 534699
View attachment 534697
View attachment 534698

Also put on some 1/2” Titan wheel spacers with hub rings to widen the stance on my stock 20x8s.
View attachment 534700
View attachment 534701
Love it! I have the True Blue 2014 with ProComp 2.75" leveling struts that have to be replaced. I have a Zone UCA and Cooper Discoverer Rugged Trek in 275/65 R20's. How are the 6112's on road? I am looking at them, the 5100's and the Eibach ProTruck. I am at least 98% on the road with my truck as a daily driver. My off roading is strictly forest roads and farm fields for hunting.
 

Attachments

  • IMG_8541.jpeg
    IMG_8541.jpeg
    186.5 KB · Views: 57
  • IMG_8542.jpeg
    IMG_8542.jpeg
    173.8 KB · Views: 59
Last edited:

tnctx02

Senior Member
Joined
Aug 23, 2013
Posts
432
Reaction score
221
Location
Texas
Ram Year
2017 RAM SLT
Engine
3.6L Pentastar V6
My 2017 and 2013 trucks
 

Attachments

  • 20231022_211318.jpg
    20231022_211318.jpg
    196.6 KB · Views: 30
  • 20240129_130026.jpg
    20240129_130026.jpg
    174.9 KB · Views: 31

ithurtz

Junior Member
Joined
Aug 19, 2020
Posts
9
Reaction score
9
Location
usa
Ram Year
08
Engine
4.7
Rough country 2.5" leveling/lift struts. Think I need to raise the rear a inch now.
 

Attachments

  • truck4.jpg
    truck4.jpg
    198.1 KB · Views: 62
  • truck2.jpg
    truck2.jpg
    172.1 KB · Views: 60
  • truck1.jpg
    truck1.jpg
    251 KB · Views: 60

Carlsbad_CO

Junior Member
Joined
Oct 10, 2023
Posts
13
Reaction score
15
Location
Denver CO
Ram Year
2014
Engine
5.7
2014 Laramie I got new. 29K miles (3rd vehicle) AEV 4" air-ride suspension lift. 315/70r 18 Geolander MTG003s, Chassis Unlimited front bumper w an Openroad winch and I just installed a GoRhino R. bumper yesterday (not in lift pic). The ride is indistinguishable from factory = very happy with it. Can raise it +2" with the lift = as much/more clearance as / than I'll ever need

1713205857221.png

1713205709275.png
 

DILLIGAF

Senior Member
Canadian Forces
Joined
May 28, 2016
Posts
5,773
Reaction score
12,335
Location
Canada
Ram Year
2012
Engine
5.7
I’m running the Trax-Motive high angle cv shafts and they been holding up for a few years now..
I snapped those first off-road trip :dogpile: Those **** waffles thinned out the CV cup to get more articulation. the fact they refunded me no questions asked is pretty telling.

Cardone HDs with limiting straps hold up the best for what I put that truck thru :peace: havent snapped one in 2y now or close to 2y. **** I just jinked myself.

I no longer off-road the Ram anyways, I got a Jeep JK for that now. Way better :roflsquared:
 
Last edited:

Lyle Longboat

2011 Ram 1500 5.7 Sport CC
Joined
Jul 30, 2019
Posts
1,859
Reaction score
1,884
Location
Moosonee, ON, CANADA
Ram Year
2011
Engine
Hemi 5.7
I had Cardone HDs on my truck when I first lifted it..snapped one in half and replaced both with these TM High angle…. Will see how she does through another winter on the ice roads/snow drifts… dont want to Jinx myself…lol
 

DILLIGAF

Senior Member
Canadian Forces
Joined
May 28, 2016
Posts
5,773
Reaction score
12,335
Location
Canada
Ram Year
2012
Engine
5.7
Thats for sure, dont jinks yourself :mf_pcwhack: all this chinse made junk is hit or miss.

But one things for sure 2y off extreme off-roading in the jeep and all I broke was the front drive shaft, pretty much my fault for lifting it, removing the sway bar and keeping the OEM front drive shaft :dogpile:

Got to love solid front axles tho, no CVs to worry about. ;)
 
Last edited:

Dirty_white_boy

Junior Member
Joined
May 19, 2021
Posts
22
Reaction score
31
Location
Canada
Ram Year
2019
Engine
5.7 Hemi
2019 2.5 Inch strut spacer. 3 inch body lift. 35s on fuel 20x12 -43 offset.
 

Attachments

  • Screenshot_20241013-150845_Gallery.jpg
    Screenshot_20241013-150845_Gallery.jpg
    31.8 KB · Views: 43
  • Screenshot_20241013-150832_Gallery.jpg
    Screenshot_20241013-150832_Gallery.jpg
    38 KB · Views: 40
  • Screenshot_20241013-151029_Gallery.jpg
    Screenshot_20241013-151029_Gallery.jpg
    46 KB · Views: 40
  • Screenshot_20241013-151147_Gallery.jpg
    Screenshot_20241013-151147_Gallery.jpg
    29.8 KB · Views: 39

Members online

Forum statistics

Threads
211,267
Posts
3,064,278
Members
171,529
Latest member
Steve Holtz
Back
Top