Lifting 2012 ram 1500

[Johnnyv87]

I want to put either 32 or 33 inch tires on my truck. What would be the best route of lifting it. I still want a smooth ride and no rubbing. Thanks

 

[Pburg375]

33" tires should be what you had on from the factory. Depends if you want 12.5 width or not. A simple leveling kit works or bilstens 2.1. 12.5 width doesn't rub once that is on.

 

[smarsmar101]

Bilstiens and rear spacer.... level kit.... body lift... suspension lift... all on which direction your willing to go.

 

[Johnnyv87]

It has 265 on the truck no which is like 30 inch I believe

 

[dodge dude94]

Yo dawg, you're in the wrong section. You need to be in the 4th gen section.

PM a mod to have them move your thread for ya.

 

[Caldwell]

Zone Adventure 2.5" Leveling Kit w/ UCA's and Diff Drop Bracket = 550$

33x12.50 r17's im assuming your still on stock 17's

seems like the best bang for the buck true level without putting excessive wear on ball joints, and cv's.

 

[mattmaxx877]

I was running 305/55/20's on Moto Metal 20x10's with a 2.5" level.

 

[Maxtrac Suspension]

Yo dawg, you're in the wrong section. You need to be in the 4th gen section.

PM a mod to have them move your thread for ya.

his post says 2012 Ram though? I thought "4th Gen" was considered 2009+ no? Maybe I am wrong but I always thought that third gen was 2002-2008 and 4th gen was 2009-up?

Either way.. is the truck a 2 wheel drive or 4 wheel drive? that will help us to better direct you