Louder!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Magnum5.9

Senior Member
Joined
Aug 8, 2014
Posts
541
Reaction score
66
Ram Year
01 ram 1500 4x4
Engine
Magnum 5.9
I apologize for blowing up RF with threads but im on vacation and don't have much else to do :roflsquared:

As of now I have a cherry bomb extreme muffler on a stock 01 exhaust system and it's not loud enough for me!

Tossing around the idea of getting a new OE fit cat made by flowmaster or putting on one of those large exhaust tips that supposedly make it louder(not the tips that sleve over exhaust pipe). Or both :)

Whats yours guys opinion on how to make the system louder/deeper?
 

rammanriley20

Senior Member
Joined
Nov 4, 2013
Posts
1,502
Reaction score
790
Location
iowa
Ram Year
1999 Ram 1500
Engine
5.9 Mag
you can always blow glasspacks out too :crazy:dump some flamable liquid in em and light em up
 
OP
OP
M

Magnum5.9

Senior Member
Joined
Aug 8, 2014
Posts
541
Reaction score
66
Ram Year
01 ram 1500 4x4
Engine
Magnum 5.9
Headers and 4" tip.

So my manifolds are rusty looking because they are OE, is there a good chance I break off one of those bolts attempting to take off the manifolds?
 

jsmith

Senior Member
Joined
Mar 8, 2015
Posts
282
Reaction score
107
Location
Texas
Ram Year
1999
Engine
5.9
So my manifolds are rusty looking because they are OE, is there a good chance I break off one of those bolts attempting to take off the manifolds?

Yes it's possible. Best to start spraying them with pb blaster 2-3 days in advance of trying to take them off. Soak them a couple times a day.
 

dodge dude94

Millennial Boomer
Joined
Sep 5, 2013
Posts
27,745
Reaction score
6,429
Location
East Texas
Ram Year
1998 Ram 1500
Engine
5.9 Magnum
4 inch exhaust with 12inch bullet mufflers dumped all dumped right after the cat.
 

dapepper9

Senior Member
Joined
Feb 7, 2013
Posts
5,906
Reaction score
2,227
Location
Iowa/Nebraska Border
Ram Year
2001
Engine
5.9L V8
Yes it's possible. Best to start spraying them with pb blaster 2-3 days in advance of trying to take them off. Soak them a couple times a day.

Fahk pb blaster 50/50 acetone/atf4. Best **** ever. Our say screw it and make a shop do it
 
OP
OP
M

Magnum5.9

Senior Member
Joined
Aug 8, 2014
Posts
541
Reaction score
66
Ram Year
01 ram 1500 4x4
Engine
Magnum 5.9

dodge dude94

Millennial Boomer
Joined
Sep 5, 2013
Posts
27,745
Reaction score
6,429
Location
East Texas
Ram Year
1998 Ram 1500
Engine
5.9 Magnum

jsmith

Senior Member
Joined
Mar 8, 2015
Posts
282
Reaction score
107
Location
Texas
Ram Year
1999
Engine
5.9
Fahk pb blaster 50/50 acetone/atf4. Best **** ever. Our say screw it and make a shop do it

Actually best **** ever is Kroil but it's high dollar, and I've used the acetone/atf and while it worked it wasn't much if any better than pb blaster
 

dapepper9

Senior Member
Joined
Feb 7, 2013
Posts
5,906
Reaction score
2,227
Location
Iowa/Nebraska Border
Ram Year
2001
Engine
5.9L V8
Actually best **** ever is Kroil but it's high dollar, and I've used the acetone/atf and while it worked it wasn't much if any better than pb blaster

I've seen tests of kroil vs acetone/atf and they're close. From what I've seen and used acetone/atf is better but that's not aleays accurate lol. Pb blaster flat out sucks imo.
 

dodge dude94

Millennial Boomer
Joined
Sep 5, 2013
Posts
27,745
Reaction score
6,429
Location
East Texas
Ram Year
1998 Ram 1500
Engine
5.9 Magnum
I haven't gotten acetone/atf to work.
Must not be doing it right. lol
 
Back
Top