Need HELP! 2003 Dodge Ram

[SaraMRAM]

Okay guys, Iam at a loss.
I have a 2003 dodge ram 1500 5.9L

NEW PARTS:
PCM
Crank Shaft Sensor
Neutral Safety Switch
Fuel Pump
Distributor Coil Pickup
Ignition Coil
Ignition Switch

I Still have NO SPARK.

We first had NO FUEL nor NO SPARK
Now with the new PCM we have fuel again, still no spark.

We have NO power to the coil.
When we supplied power to the coil we still have no spark.

Ready to burn this thing to the ground.
Anyone have any advice????

 

[Redtruck-VA]

On the hemi engine if the PCM doesn't sense a crank signal in 2-3 seconds of ignition "on" then the ASD relay is de-energized and there is no spark or fuel. I would check fuses, relays and wiring connections.

Also, if you had the distributor out. It needs to be installed using the Service Manual guidelines, Engine at TDC crankshaft mark with the distributor rotor pointed at the Cam sensor, indicating you are indeed on number 1 cylinder at TDC. I just saw that in the manual and see how I would probably screw that up if I was doing it. lol