*new* 4.5" 2wd lift spindles

[sausec17]

NICE! What is the backspacing on your wheels if you don't mind me asking?

5" backspacing. 20x9. 0 offset.

 

[Maxtrac Suspension]

Alright sweet, good to know. Thanks!

 

[sausec17]

ok, better pics

 

[Adan]

MaxTrac is now offering 4.5" lift spindles for 02-13 2wd 1500's!! cheaper alternative to CST spindles

02-13 DODGE RAM 1500 2WD 4.5″ Lift Spindles | Maxtrac Suspension

Dodge RAM 2WD 1500 4 5" Lift Spindles 09 13 Front and Rear | eBay

Do you guys offer any 3" Spindles?

 

[OutlawTrucker]

Do these 4.5" spindles push the front wheels out like the cst ones do? If not I might bite

 

[sausec17]

Do these 4.5" spindles push the front wheels out like the cst ones do? If not I might bite

Yea they do man, about 1.5"

 

[BULLRAM]

outlaw.you only need spacers for the rear, and just 1.5, I have hub concentric and wheel concentric, spacers, I tow with mine since 09....

 

[sausec17]

outlaw.you only need spacers for the rear, and just 1.5, I have hub concentric and wheel concentric, spacers, I tow with mine since 09....

Got mine from motorsport tech, the BORA brand 1.5"

Knowing Outlaw, I dont think he likes the wider track width

 

[BULLRAM]

gotcha......(SUP?...SAU..)

 

[sausec17]

gotcha......(SUP?...SAU..)

Ahh its bullram! The first known lifted 7" 4th gen to my knowledge. This guy hooked me up with tons of info when I first started lifting my truck. Great guy!

 

[BULLRAM]

Now you are higher than me.....your truck is looking sweet, back in 09 , I called all around and NO is all I heard, till I tried the 07 spindles on my truck, then it got crazy....

 

[jasonb135]

Are these interchangable between 1500's and 2500's, reason I ask is I found a used set off a 2500 that provide 3.5" of lift, the 1500 and 2500 spindles look the same on your website? I have a 1500 but want the 4.5" of lift. *nevermind just looked at them side by side and they have different caliper mount tangs*

 

[jsl6v8]

Hey Sauce that truck fit in that garage of yours lol. Looks great!

 

[Maxtrac Suspension]

Are these interchangable between 1500's and 2500's, reason I ask is I found a used set off a 2500 that provide 3.5" of lift, the 1500 and 2500 spindles look the same on your website? I have a 1500 but want the 4.5" of lift. *nevermind just looked at them side by side and they have different caliper mount tangs*

Yeah good catch! the Ram 1500 2wd spindles are 4.5" and made for the 5 lug truck while the Ram 2500 2wd spindles are 3.5" with a completely different design and for the 8 lug trucks. Would be awesome if they did interchange though. Check out our 4.5" spindles new if you get a chance. They come with DOT approved brakelines and are very fairly priced. There are a few sellers out there with a good price on them and free freight. We also have parts for the rear as well. PM me if you need referrals or part numbers. Thanks!!

 

[yodge]

Hey guys I want to know if I should be concerned about this. I just noticed it today. My left (driver) side spindle the rubber grommet I'm not sure what to call it, is torn to pieces. I'll attach pictures. I want to call maxtrac but have to wait til Monday driver side
here's the passenger side for comparison


Sent from my iPhone using Tapatalk

 

[OutlawTrucker]

Tighten down the ball joint tighter.

 

[sausec17]

Yep, wasn't tightened down all the way. Replace the garment too, that keeps the dirt from getting to the grease.

 

[yodge]

I just realized it cracked my a arm


Sent from my iPhone using Tapatalk

 

[sausec17]

good lord! do you have any spacers installed too? and/or longer shocks?
Off roading pretty hard?

 

[yodge]

Yes I have the 2.5" spacer kit with longer shocks
I actually thought I was going easier on my truck than normal... Apparently not. What should I do ? Look into getting some after market a arms or just replace that side ?


Sent from my iPhone using Tapatalk