no spark to coil...

[Firefighter613]

Changed the Can Sensor and Crank sensor, went to crank it, would turn over but no fire. Broke out test light, had power going to the coil with the key turned over, go to crank it, no power going to coil.... any ideas?

It fired up yesterday, changed back to the old cam sensor and nothing, no spark.

 

[heavymetal]

i had some dirty PCM wires do the same this thing to me once, cleaned all the contacts, good to go. goodluck

 

[dodge dude94]

Check your ASD relay in your PDC (fuse box).