Panel where rear window switch is

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RamFan2

Member
Joined
Feb 27, 2012
Posts
93
Reaction score
2
Ram Year
2011
Engine
Hemi 5.7
Hey everyone...
Can someone tell me how to remove the overhead panel where the rear window switch and garage door buttons are? I think I found where that rattle is coming from so I wanna peek in there and see if I can make it stop. Thanks
 

300MAG

Senior Member
Joined
Jun 25, 2011
Posts
256
Reaction score
33
Ram Year
2011
Engine
5.7
Pull down to disengage the clips, the first time is usually the hardest. I usually grab it on both sides in the middle.

Sent from my Samsung Galaxy-S3 using Tapatalk 2
 
OP
OP
R

RamFan2

Member
Joined
Feb 27, 2012
Posts
93
Reaction score
2
Ram Year
2011
Engine
Hemi 5.7
Pull down to disengage the clips, the first time is usually the hardest. I usually grab it on both sides in the middle.

Sent from my Samsung Galaxy-S3 using Tapatalk 2

Do I pull down where the plastic meets the headliner?
 

300MAG

Senior Member
Joined
Jun 25, 2011
Posts
256
Reaction score
33
Ram Year
2011
Engine
5.7
Yup, just get your fingers in between the headliner and console pull down, you can pull on the corners. The first time is a b! tch. You will think it's screwed in but it's not once it breaks free just tilt it out to clear small lip on the back edge of console.

Sent from my Samsung Galaxy-S3 using Tapatalk 2
 
Back
Top