Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
This info is for 13 & up. Can't confirm any PNs for the 09-12 trucks since they changed a lot of the electrical in 2013+[/QUOT
Thank you @Mpgrimm2. Will try to find out. Hey, new project, lol
Installed my power fold tow mirrors today, used your parts list and everything went perfectly.This info is for 13 & up. Can't confirm any PNs for the 09-12 trucks since they changed a lot of the electrical in 2013+
Which PNs did you use and can you confirm if both AutoDim (req's AutoDim rearview mirror)?Installed my power fold tow mirrors today, used your parts list and everything went perfectly.
I did the black tow mirrors with turn/approach/heat/memory on my 2500.
Super simple install took 20 minutes.
I don’t have the rear view dim mirror so I don’t know about the dimming, I also don’t have memory seats but I ordered memory mirrors in case I upgrade in the future.
Which brand did you go with? Quality seem good? My son will be buying a set pretty soon for his and at some point I want to buy a set for mine. I was going to go with the 1A's
Those are oem PN so he got actual OEM.
Sent from my iPhone using Tapatalk
Yes, Auto dim is on my list.
Thank you for the link, I still need to order my single zone atc harness from you! Those parts have been sitting in my garage for 6 months lol.
$500 for the kit would be a great deal. Mine ran about $1,000 for both mirrors, door modules and switch. I ordered them and they were here in a few days. I try to stay OEM whenever possible. I’ve heard good things about 1A though.I called a few dealers and all said $495 for the pair but they were backordered until about November. There were 10 dealers in the country that had a pair. in stock. These were matte finish with power fold, puddle, heated, and turn signal. No dimmer and no memory. They did say they could order the mirrors individually and get them quicker but they would be about $1000 but the kit was only $495. The 1A's are $395 for the pair.
The tilt in reverse works with these as well, I thought it only worked with the chrome but I was wrong!
Ok I added the auto dim rvm and that is working but the tow mirrors are not. I followed the Known Working on the Alfa thread but so far no go on either tow mirror.
AlfaOBD Programming notes
- ** AlfaOBD
(for activating factory features yourself. See docs linked in OP for current list of settings). Thanks @Ghost Ram !
Note:
EC = Electro Chromatic (AutoDim) glass.
-----------------------------------
Mirrors Interior Rear View and Exterior: (signal, puddle, dim)
Vehicle Configuration 3:
> Interior EC Mirror Present (Rear view mirror): "yes" ... if you have this mirror
Customer Programming Features:
> EC Mirror Auto Dim: set/yes
. (Rear view mirror)
...I believe this merely turns on/off the auto dim mirror which can also be accomplished through the menu settings or soft key on the 8.4 screen.
-----------------------------------
Regular Mirror Codes w/Power fold:
Doors Configuration:
> Folding mirrors Present: Set/yes
> Mirror Turn Signals Present: set/yes
> Mirror Approach Lights Present: set/yes
> Electro-chromatic Driver Mirror Present: set/yes
> Electro-chromatic passenger mirror Present: set/yes
-----------------------------------
Tow Mirrors Codes w/Power fold:
Thanks KAD !
Doors Configuration:
> Folding mirrors present: Set/yes
> Mirror turn signals present: Set/yes
> Mirror Approach Lights Present: Set/yes
> Puddle Lamp Present: Set/yes
. (Not sure about this one being needed)
> Tow Mirror Present: Set/yes
. (Tow Mirror Flip Up Correction)
-----------------------------
Auto Tilt Mirrors in Reverse:
** For premium mirrors (chrome capped with more than 4 wires on white plug). Requires Memory seat module/seats & additional wiring...
Doors Configuration:
> Driver Memory Mirrors Present: yes/set
> Passenger Memory Mirrors Present: yes/set
CustSetMenu 2:
> Tilt mirror in reverse: yes/set
----------------------------
Rtn to Post 1.