Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Does the track bar ever contact the frameside mount when the suspension compresses? It looks dang close!He wants pic's of how i mounted my panhard bar,so there's not many to share guysFor some reason you can't share a picture in messages
@Ram1500_RT you can see the bottom hole,which was the original mounting hole,i just redrilled the hole farther up,and got rid of the relocation bracket,which i hated,as it always required maintence in regards to keeping it tight
I did clearance the frame bracket when i moved the trackbar up,as it would have made contact with-out some clearancing. You can't see it in the photos,but the frame bracket has a round notch ground into it.Nothing a few minutes with a die grinder and carbide bit didn't fix though
The group of guys i hang around with,are all old school drag racers,so speed is everything to them,whether it's big or little cars
