Retrofit Panasonic Uconnect to Gen 4 '13

[This-German-Guy]

Hi

I want to update to a Pansaonic Uconnect to my '13 Gen 4

The Part No from the Uconnect is: 68331635AJ
It has no built in Nav. This means its an UAS?

The software Version is 21.11.11
and i first want to update to 30.24
but the Uconnect says the software is not compatible

Where can i get the correct software updates?
i searched the forum an downloaded the 30.24 UAS but it doesn't work.

best regard from Germany

 

[crash68]

If my memory recalls the correct information, the Panasonic radio will work in the '13s but I believe the buttons on the screen for the heated seats and steering wheel will be greyed out and not work. The physical buttons still work.
Let's tag a few people that probably know if I'm correct about this. @SitKneelBend @Mpgrimm2

 

[SitKneelBend]

Hi

I want to update to a Pansaonic Uconnect to my '13 Gen 4

The Part No from the Uconnect is: 68331635AJ
It has no built in Nav. This means its an UAS?

The software Version is 21.11.11
and i first want to update to 30.24
but the Uconnect says the software is not compatible

Where can i get the correct software updates?
i searched the forum an downloaded the 30.24 UAS but it doesn't work.

best regard from Germany

Your firmware version is 22.64. You will need firmwares v28.3 and then v40.1 to get on the latest firmware. I'm assuming this has original north American firmware on it (even though you are in Germany), if so, PM me and I'll send you the update files.

 

[This-German-Guy]

Your firmware version is 22.64. You will need firmwares v28.3 and then v40.1 to get on the latest firmware. I'm assuming this has original north American firmware on it (even though you are in Germany), if so, PM me and I'll send you the update files.

The Uconnect shows ver. 21.11.11
Must I update from 21.11.11 to 22.64 --> 28.3 --> then 40.1 ?

I bought the Uconnect from an other Guy in Germany. He says the Uconnect has no conversion.
It seems to be right, because i have no radio signal.
Maybe its from a Ram export.

 

[This-German-Guy]

If my memory recalls the correct information, the Panasonic radio will work in the '13s but I believe the buttons on the screen for the heated seats and steering wheel will be greyed out and not work. The physical buttons still work.
Let's tag a few people that probably know if I'm correct about this. @SitKneelBend @Mpgrimm2

Yes thats correct.
In the Uconnect the touch buttons are grey.
I must buy an emulator harness module. the hardware buttons are working.

 

[SitKneelBend]

The Uconnect shows ver. 21.11.11
Must I update from 21.11.11 to 22.64 --> 28.3 --> then 40.1 ?

I bought the Uconnect from an other Guy in Germany. He says the Uconnect has no conversion.
It seems to be right, because i have no radio signal.
Maybe its from a Ram export.

Nope, their naming is misleading. The Firmware version is the the "Application Version" line, not software version.

 

[This-German-Guy]

Nope, their naming is misleading. The Firmware version is the the "Application Version" line, not software version.

Yes, I can see it now