chaten
Junior Member
Hello over the last couple years my 2010 ram 1500 5.7 has been ticking with no cel and no hesitation, recently it developed a heavy hesitation upon leaving a stop light, still no cel,
Code reader shows -15⁰ knock retard.
I bought an oem cam and lifters back in 2021 and procrastinated about installing them.
Last weekend I finally changed cam, lifters, all intake and exhaust valver and push rods the vvt solenoid, exhaust manifold gaskets and hardware and when they get delivered the mds solenoids. I started it up and it sounded like new... for 7 minutes then the ticking from the left side and hesitation came back. I. Lost. I'm hoping one of the mds solenoids are stuck open.
It's a 2010 100% stock 5.7 with 220,000 km
Any ideas would be appreciated!
Code reader shows -15⁰ knock retard.
I bought an oem cam and lifters back in 2021 and procrastinated about installing them.
Last weekend I finally changed cam, lifters, all intake and exhaust valver and push rods the vvt solenoid, exhaust manifold gaskets and hardware and when they get delivered the mds solenoids. I started it up and it sounded like new... for 7 minutes then the ticking from the left side and hesitation came back. I. Lost. I'm hoping one of the mds solenoids are stuck open.
It's a 2010 100% stock 5.7 with 220,000 km
Any ideas would be appreciated!