Trouble finding LT's

[amenges]

I'm looking at getting some LT's and exhaust but I'm having trouble finding any headers for my 08 QC Hemi

Everywhere I looked doesn't show 2008. They have 06-07, etc. but not 08. Is there any difference or can I use them without issues?

Here are the only ones I've found:

Kooks

Hedman

PaceSetter

 

[KGBIGCOUNTRY]

You just a 1500? If your a 1500 non mega cab all of those listed should work. Alot of us run the coated pacesetters.

 

[amenges]

Awesome I am 1500 no mega. Thanks KG

 

[BlackedOutHemi]

I have an 08 qc. And actually had some problems with the lt headers. Their fit was exactly the same, but the upstream passenger side O2 sensor was too short.

While that could be fixed easy enough with an extension, it threw a code the whole time I had them on and never got the code fixed. It didn't cause any problems, just a code.

I'm not sure why it stops at 07, because I have not installed headers on any other 08 truck, but my guess would be the wiring harness got shorter and makes it not reach. To check, hop underneath your truck and see how far the connector for the front O2 sensor reaches out from the top of the transmission, and of it can be pulled forward any.


Sent from my iPhone using Tapatalk

 

[truckin151]

The O2 extentions are not just for the 08's or for the QC's, mine needed them as well with the lontubes

 

[BlackedOutHemi]

For just the rear? Or the front one also?


Sent from my iPhone using Tapatalk

 

[KGBIGCOUNTRY]

No prob, hit up Dave on here at DB customs with the PN and see if he can get you a deal on them. You will want to order new Mopar gaskets also. Up to you on header bolts.

 

[truckin151]

From passenger and both rears

 

[amenges]

From the looks of this picture it looks like the gaskets and o2 sensor extension are included with these headers. What do y'all think?

Kooks

 

[TheSatinPumpkin]

1k is steep imo but im cheap and weather your choice is i would stick with oem gaskets.

 

[Budakane]

Pacesetter FTMFW!!!!!

 

[KGBIGCOUNTRY]

Deff save yourself hassel and do OEM gaskets the first time

 

[amenges]

Mopar gaskets it is. What about header bolts? OEM or the bolts that come with the headers?

 

[KGBIGCOUNTRY]

You can use Stage 8's or im running grade 8's with a locking washer that was recommended to me by a few guys. I have checked mine with a 13mm wrench twice now and they havent ever been loose. The header flange is wider then the OEM manifolds.