What did you do to/with your second gen today?

[Jrock2394]

Probly a stupid question but if I'm replacing left outer, connecting sleeve, and left inner tie rod ends can I just take the whole assembly out, match the length with the new parts, and install the new one back in? Or is there a certain order it has to be done in? Wanna make sure I don't screw up steering components.


Sent from my iPhone using Tapatalk

 

[dodge dude94]

https://m.youtube.com/watch?feature=youtu.be&v=UKooDvSUI2A

It still needs a tune up but it's mellow until you lay into it.

Sounds like a viper lol

 

[joepizuro]

I pushed the Rev limiter a little higher so I can move the shift points higher as well. Also cleaned up the idle rpms, spark, fuel, and some other stuff. Will put that tune on Sunday.

 

[BBartow]

Probly a stupid question but if I'm replacing left outer, connecting sleeve, and left inner tie rod ends can I just take the whole assembly out, match the length with the new parts, and install the new one back in? Or is there a certain order it has to be done in? Wanna make sure I don't screw up steering components.


Sent from my iPhone using Tapatalk

That's what I did since the new tre's were different lengths than my old ones. Once you get it in, look at the tires and if they aren't straight just play with the sleeve. You'll need to get an alignment anyway so just get it as best as you can.

 

[BBartow]

https://m.youtube.com/watch?feature=youtu.be&v=UKooDvSUI2A

It still needs a tune up but it's mellow until you lay into it.

Sounds good. The V10s usually sound real good at idle, but once you lay into it they sound like ****. Yours sounds pretty good.

 

[joepizuro]

Just trying to figure out what the buzzing whirring sound is at mid to high rpms

 

[BlackMagnum2000]

Well add some more to my list. Soon new radiator, e fans, ac compressor, orifice tube, and condenser

 

[joepizuro]

Truck was in park so idk about pinion bearing. I posted the clip and you can hear it if u listen close

 

[joepizuro]

Sounds good. The V10s usually sound real good at idle, but once you lay into it they sound like ****. Yours sounds pretty good.

The trick is to use an x or h pipe. Otherwise duals sound like a loud 5 cylinder.

 

[BlackMagnum2000]

Truck was in park so idk about pinion bearing. I posted the clip and you can hear it if u listen close

Oh I didn't even listen to the video and I thought you said speed not rpm lol. My bad. Yeah idk.. that's quite an odd sound.

 

[Jrock2394]

That's what I did since the new tre's were different lengths than my old ones. Once you get it in, look at the tires and if they aren't straight just play with the sleeve. You'll need to get an alignment anyway so just get it as best as you can.

Did you feel a noticeable difference in the steering with the new ones?


Sent from my iPhone using Tapatalk

 

[jbmobbs]

This should be interesting when I'm done lol

Sent from my SM-G900V using Tapatalk

 

[BBartow]

Did you feel a noticeable difference in the steering with the new ones?


Sent from my iPhone using Tapatalk

I haven't drove it yet

 

[mitchbowers]

https://m.youtube.com/watch?feature=youtu.be&v=UKooDvSUI2A

It still needs a tune up but it's mellow until you lay into it.

sounds exotic. you won't find another sound quite like that. like it a lot myself

Sent from my XT1575 using Tapatalk

 

[joepizuro]

I'll get a better clip after I find out what's making that winding noise. Maybe alternator or a pulley or that oil cleaner thing lol

 

[dodge dude94]

This should be interesting when I'm done lol

Sent from my SM-G900V using Tapatalk

Which one is that one?

I'll get a better clip after I find out what's making that winding noise. Maybe alternator or a pulley or that oil cleaner thing lol

Just take the belt off and go from there.



Put gas in it. Going to be in H-town tomorrow so come Sunday I'm getting the oil changed in the rice rocket, gear oil for my front diff and washer fluid since it's flashing low washer at me. lol

 

[jbmobbs]

Which one is that one?

Just take the belt off and go from there.



Put gas in it. Going to be in H-town tomorrow so come Sunday I'm getting the oil changed in the rice rocket, gear oil for my front diff and washer fluid since it's flashing low washer at me. lol

Man iv had 4 or 5 dodges since iv last been on here. I just don't come on here as much because it's a desert wasteland lately lol.

Sent from my SM-G900V using Tapatalk

 

[Joe w.]

Man iv had 4 or 5 dodges since iv last been on here. I just don't come on here as much because it's a desert wasteland lately lol.

Sent from my SM-G900V using Tapatalk

What are you doing with all these trucks

 

[jbmobbs]

What are you doing with all these trucks

I fix and sell them or part them out

I wanted to keep this one it's a 95 with a built 318 and a beefed up automatic.

Sent from my SM-G900V using Tapatalk

 

[dodge dude94]

Man iv had 4 or 5 dodges since iv last been on here. I just don't come on here as much because it's a desert wasteland lately lol.

Sent from my SM-G900V using Tapatalk

So which one is that one? Lol