What did you do with your 5th Gen this week?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

stevieb92

Member
Joined
Dec 7, 2023
Posts
91
Reaction score
260
Location
Pittsburgh, PA
New wheels and tires this weekend.

Black Rhino Calico in gunmetal grey 20x9 0 offset
BFG KO3 Radial All Terrain 285/65R20
Factory height suspension. The truck is a little dirty in these pics.
A tiny bit of rubbing the mudflap when turning full lock but when I install the Eibach Pro Lift Coil 2R suspension later this month it should be clear. Thanks to @Realtruck for the great deal on the wheels!

Ram_Rebel_New_Wheels_01.jpeg

Ram_Rebel_New_Wheels_02.jpeg
 

2020GCM

Junior Member
Joined
Mar 23, 2022
Posts
6
Reaction score
12
Location
Ontario
Ram Year
2020
Engine
5.7 HEMI
Replaced my delaminating 8.4" touchscreen, not too bad removing the center stack and swapping the screen out. Took about a 1/2 hour taking my time.
 
Last edited:

commander

Senior Member
Joined
Oct 28, 2012
Posts
115
Reaction score
132
Location
Myrtle Beach S.C.
Ram Year
2024 1500 Limited Crew Cab
Engine
Hemi 5.7
Clay Bared and waxed, also took off the Ram nameplates on both front doors, looks so much better without them! Debating if I want to take off the Limited and 4 x 4 on the tail gate. But the side definitely look a lot cleaner.

JT
 

MattHemi

Member
Joined
Mar 21, 2016
Posts
96
Reaction score
18
Ram Year
2004
Engine
Hemi 5.7L
New wheels and tires this weekend.

Black Rhino Calico in gunmetal grey 20x9 0 offset
BFG KO3 Radial All Terrain 285/65R20
Factory height suspension. The truck is a little dirty in these pics.
A tiny bit of rubbing the mudflap when turning full lock but when I install the Eibach Pro Lift Coil 2R suspension later this month it should be clear. Thanks to @Realtruck for the great deal on the wheels!

View attachment 552356

View attachment 552357
Looking sharp! We just ordered a set of KO3 from 4Wheelonline.
 

1stindoor

Senior Member
Joined
May 1, 2019
Posts
427
Reaction score
638
Location
NC
Ram Year
'23 2500 MegaCab
Engine
6.4 Hemi
Haven't "done" it yet, but the matching Fab Fours front bumper was delivered today.20241021_103100.jpg
 

Tulecreeper

Senior Member
Joined
May 27, 2023
Posts
2,323
Reaction score
2,890
Location
AZ - 83 Miles SW of the Geographical Center
Ram Year
2023
Engine
6.4 Hemi
Easier than just not having to push the button?
Yes, because it takes 1.5 seconds to reach down and push the button. It takes about 45 minutes to dismantle the dash, install the harness, then reassemble the dash - if you're lucky and don't break a trim piece. There are a few thousand 1.5 second periods in 45 minutes, so in the long run it takes more time to install the thing. It's math. :cool:
 

bluecheese

Senior Member
Joined
Nov 6, 2022
Posts
201
Reaction score
281
Location
New Orleans, LA
Ram Year
2021 Ram 1500 eTorque
Engine
Hemi 5.7
Yes, because it takes 1.5 seconds to reach down and push the button. It takes about 45 minutes to dismantle the dash, install the harness, then reassemble the dash - if you're lucky and don't break a trim piece. There are a few thousand 1.5 second periods in 45 minutes, so in the long run it takes more time to install the thing. It's math. :cool:
It plugs into the Security Gateway Module under the steering wheel. No need to dismantle the dash. It took more time to open then box than to install this thing. I drive my truck at least twice a day. By my calculations, I am now saving myself 18 minutes a year by not having to push the button. It's math. :cool:
 

1stindoor

Senior Member
Joined
May 1, 2019
Posts
427
Reaction score
638
Location
NC
Ram Year
'23 2500 MegaCab
Engine
6.4 Hemi
Back
Top