What size is my lift?

[bmartonik8]

I recently purchased a 2010 Ram 1500 5.7l sport. It came already lifted with 35x12.50x20 Nitto trail grapplers. I'm trying to figure out what size lift is on it. Anyone have any ideas? Thanks.

 

[Bully's Performance]

Looks like either a large level of a 4" lift, take some pics of the actual suspension under the truck and we can probably make a better guess, or you could measure from the ground to the center of the wheel wells and that would give us a decent idea as well, it apears there is still a little rake to the truck so could be blisteins up front and a rear spacer maybe, very hard to tell without seeing pics of the underneath.

Thanks
Jeremiah

 

[Bully's Performance]

Oh forgot SWEET looking truck you have there congrats!

 

[rut1095]

Looks like a 4".

Here's a pic of mine with a 6"



Sent from my iPhone using Tapatalk

 

[mattman_13]

Does is have a front cross member drop? Look at the struts is there spacers?
Agree with looking like a 4" but if it were mine I'd want definite answers so get under there maybe snap some pics.

 

[ARust]

That's either a large 4, maybe even 5 or small 6. Not much help man lol I'm sorry.

This is what my truck will look like on a 4 inch lift with 35x12.5x20s slapped underneath it.

Sent from my SCH-I605 using Tapatalk

 

[bmartonik8]

Thanks for your help! Here are a few pictures I took this morning. I apologize for the salt sprayed all over everything. It's hard to keep it clean this time of the year in Pennsylvania! The front fender measurement is 42" and the measurement to the middle of the rear fender well is 44". The tires are pretty worn so they only measure a little over 33 inches at the moment.

 

[Djeazie]

Suspension looks stock? Maybe 3" body lift?

 

[mattman_13]

That'd be my guess too.
What's the actual size of the tire not what they measure?

Take a picture from sorta low and behind on the truck or just look for the rear bumper to be cut and exposing a lot of the hitch and subframe.

Suspension Def looks all stock. Where abouts in pa are you?

 

[Cruizer]

I'm thinking body lift too. Look how straight the front axels are. Nice lookin' truck though. Congrats!

 

[argray90]

Finally a thread that isn't the same as all the others it seems. I agree with the body lift. Good looking truck got a lot of the work out the way!

 

[bmartonik8]

Thanks guys! I can't believe I didn't notice it IS a body lift after all. These trucks hide them so well. I think I might pair it with a 2.5" leveling kit.

 

[bmartonik8]

That'd be my guess too.
What's the actual size of the tire not what they measure?

Take a picture from sorta low and behind on the truck or just look for the rear bumper to be cut and exposing a lot of the hitch and subframe.

Suspension Def looks all stock. Where abouts in pa are you?

I'm in Elk County. North Western/Central PA. You from PA too?

 

[mattman_13]

I'm in Elk County. North Western/Central PA. You from PA too?

I'm from ky but work up in pa. Currently around Scranton but been all over.

But I agree with argray. Finally a thread that's not all bout the same thing.

 

[Bully's Performance]

Not to go off topic but mattman_13 your truck looks killer

Thanks
Jeremiah

 

[mattman_13]

Not to go off topic but mattman_13 your truck looks killer

Thanks
Jeremiah

Thank you sir.