Kapt
Senior Member
- Joined
- Sep 23, 2015
- Posts
- 1,023
- Reaction score
- 305
- Ram Year
- 2016
- Engine
- 3L
OK. I screwed up. I just don't know how badly. My leveling kit had no instructions in it. I watched a bunch of videos and figured I would be OK. I got it done on my 1500. When I put the shocks back in, I didn't know I was supposed to turn the blocks 180 degrees. I lined them up and was only able to get two of the three bolts in. I figured I would tell the alignment shop, give them the bolts, and let them deal with those pesky third bolts. Then after I got it all back together I found out about the 180 thing. So on each front shock, I have two out of three bolts holding them in place. It doesn't shake. It makes no noises. It doesn't pull when braking. If I didn't know, I wouldn't be able to tell there were bolts missing. Do I really need to spend another whole day removing everything, turning things around, just for two bolts? It drives perfectly