Donut86
Junior Member
I have a 2013 ram 3.6 tradesman (flex fuel)
I cannot figure out why it continues to overheat. This is a run down of what I’ve done.
1. Check engine light came on and I got a code P0118 for temperature sensor
2. Replaced coolant temperature sensor. Problem still not fixed.
3. replaced thermostat with new one purchased at auto zone. still overheating, still had engine light.
4. Replaced temperature sensor again in case it was faulty
5. Replaced thermostat with a $240 factory thermostat.
6. Flushed my coolant.
still overheating, still have check engine light.
I have no leaks from my water pump, my radiator fan turns on when my ac is on but doesn’t turn on when overheating during idle. I’m at a complete loss. It’s like my coolant doesn’t want to circulate. Everything seems to be working but I’m not sure why it’s not circulating the coolant.
I cannot figure out why it continues to overheat. This is a run down of what I’ve done.
1. Check engine light came on and I got a code P0118 for temperature sensor
2. Replaced coolant temperature sensor. Problem still not fixed.
3. replaced thermostat with new one purchased at auto zone. still overheating, still had engine light.
4. Replaced temperature sensor again in case it was faulty
5. Replaced thermostat with a $240 factory thermostat.
6. Flushed my coolant.
still overheating, still have check engine light.
I have no leaks from my water pump, my radiator fan turns on when my ac is on but doesn’t turn on when overheating during idle. I’m at a complete loss. It’s like my coolant doesn’t want to circulate. Everything seems to be working but I’m not sure why it’s not circulating the coolant.