WOW 50" Curved LED Lightbars are under $100.00 now

[Talon_66]

Damn makes me want to run duals

 

[Rzrman328]

I'm waiting to test my light setup at glamis (total darkness) to see if I need the 50".

I have 50w HID's in both heads and fogs plus the 30" led bar.

 

[BlownGP]

You guys just finding out about these prices? They have been dropping all year. Check out the 42" Curved bar thread.

I just bought a 42" Curved bar for $80
I'm hooking it up this weekend, It's going to be on a remote with dimmer and strobe functions.

 

[wedge775]

You guys just finding out about these prices? They have been dropping all year. Check out the 42" Curved bar thread.

I just bought a 42" Curved bar for $80
I'm hooking it up this weekend, It's going to be on a remote with dimmer and strobe functions.

Better post pics!!! I wanna see what one looks like with our color Ram!!

 

[Hemifatboy]

They have 20 inch are that mount in the grill , no drill , lights , brackets and wiring for about 100$ , I wouldn't drill holes in my roof

 

[SilverStreak88]

I'm waiting to test my light setup at glamis (total darkness) to see if I need the 50".

I have 50w HID's in both heads and fogs plus the 30" led bar.

I only got the 52" on my roof because my pasture is grown up a lot of times and it blocks all my lower lights.

 

[gassersarentdead]

Correct me if im wrong, but aren't there brackets that are drilled into the door jamb and nothing needs to be drilled into the roof?

 

[SilverStreak88]

Correct me if im wrong, but aren't there brackets that are drilled into the door jamb and nothing needs to be drilled into the roof?

You are correct, no roof drilling, just 3 bolts in the door jam behind the door seal. I would recommend depending on how close to the body the mounts come to put a piece foam weatherstripping on the back side to keep it from rubbing metal to metal.

 

[BlownGP]

Better post pics!!! I wanna see what one looks like with our color Ram!!

Will do!!

 

[Stangshcky12]

I bought a curved 52" for dirt cheap, idk if I'll put it on or not though
I havent even had my 30" on my truck for the last month

 

[JinxCanada]

Anyone else? I'm not paying twice the price of the light for brackets.

the CJC OffRoad ones are what I got...because they install INSIDE the door jams with rivets...no drilling into your roof.

 

[JinxCanada]

I've been thinking about getting a pair of these for my truck. They fit 50" to 52" bars depending on how you mount them, and they say they fit some curved bars also.

Light Bar Brackets 2010 2015 Dodge Trucks for 50" 52" Bars Sale Roof Mount | eBay

I wish those had been available when I got my lightbar for the roof. The only thing is guys..you WILL have to drill another hole and put a bolt INTO the heat fins to keep your lightbar from turning downwards.

 

[JinxCanada]

You guys just finding out about these prices? They have been dropping all year. Check out the 42" Curved bar thread.

I just bought a 42" Curved bar for $80
I'm hooking it up this weekend, It's going to be on a remote with dimmer and strobe functions.

how do you make your lightbar strobe? I'm interested in that ability.

 

[BlownGP]

how do you make your lightbar strobe? I'm interested in that ability.

You got a PM

 

[wedge775]

I've been thinking about getting a pair of these for my truck. They fit 50" to 52" bars depending on how you mount them, and they say they fit some curved bars also.

Light Bar Brackets 2010 2015 Dodge Trucks for 50" 52" Bars Sale Roof Mount | eBay

Went ahead and pulled the trigger on a set of these brackets. They look good, and seem very sturdy. The paint, could have been better, gonna sand mine down and color match mine. Mounting hardware was just eight self tapping screws, believe I will be replacing those with some rivet nuts and flat head bolts.

 

[BlownGP]

Light bar installed. Sorry for the rainy pics. The one time I remember to get pics and it's raining.







From up close, it looks like it needs to be raised up some, but from a distance it looks perfect. I just like how the curve of the bar pretty much matches he bumper exactly. Like Ram designed it like that.

 

[madrock]

Went ahead and pulled the trigger on a set of these brackets. They look good, and seem very sturdy. The paint, could have been better, gonna sand mine down and color match mine. Mounting hardware was just eight self tapping screws, believe I will be replacing those with some rivet nuts and flat head bolts.

Subscribing to see the progress.

 

[Rzrman328]

Light bar installed. Sorry for the rainy pics. The one time I remember to get pics and it's raining.







From up close, it looks like it needs to be raised up some, but from a distance it looks perfect. I just like how the curve of the bar pretty much matches he bumper exactly. Like Ram designed it like that.

Sweet...what brackets you end up using?

 

[BlownGP]

I guy on here Turblown03. Great guy and brackets