What did you do with your 4th Gen this week?

[RAM DRVR]

Just drove 600 miles to Orlando/Disney/Universal. 22 mpg @ 78 mph most of the way.

 

[Random_Walk]

Taking her in to get fixed (parts came in!) well, we'll go as soon as she defrosts...

 

[Lethal Hemi]

Dam! Your got all the cool rides!

Thanks man! She about to be done with new set up. Just ran out of money for a while [emoji23]


Sent from my iPhone using Tapatalk

 

[JimsRamTruck2012]

Looks like some moving going on!

And you would be correct. My parents.

 

[DJ_M]

Yes they did! I saw them spray it down. I was impressed on that part


Sent from my iPhone using Tapatalk

Well I'm getting mine redone then! Mine is full of bubbles because of those ridges. Getting the adhesive applied this time should get it all down perfectly.

 

[EagleChief]

Today is my truck's 4th birthday! Bought it with 9 miles on the odometer. Put 15 miles on it during the test drive, then drove it 5 hrs home.

Although my bed cover I added the other day was my Christmas present, I'm going to say it's the truck's b-day present, too!


Sent from my iPhone using Tapatalk

 

[wespentecost]

As of recent, I added the vararam intake, diablo sport pcm and the i3, carven progressive exhaust with 5" tips, pedal commander, custom tune for i3-still tweaking it, love it though! lots of vinyl stickers on back glass, red led lights for interior, led reverse lights. Not sure what else I'll add, wish we had more grill replacements and knob shift replacements vs adding a sticker to it.....oh. also running redline 5w-30 with the k&n oil filter, redline water wetter.

Sent from my SM-G950U using Tapatalk

 

[WilliamS]

New fuel level sensor! Hooray for that I guess

 

[Random_Walk]

Active Grille shutters replaced just fine, and everything (including MDS) works again.

Only real difference is that where I once saw "ECO" on the dash (in bold and everything), I now see "Eco" (normal letters, proper capitalization, etc.) Guessing they flashed my PCM/ECM set while it was in there?

 

[savage_46]

Sounds like a fun swap! Would love to hear about how it changed the character of the truck!

Keep us updated.

And timeslips, please...unless you don't plan to run it at the strip!

It's a 16, 8 spd, CC 4wd 3.92 L/S with HF 90 octane tune. Before, I would comfortably drive with traction partially disabled in tow/haul(ass) no matter the weather. Now, I'm a little wary of doing so. She's rowdy. Turn off TC & tow/haul on, she's a damn monster. Did a 3 gear downshift (5-2 or 6-3) at WOT pinned me to the seat this morning. About 75 to 95 takes roughly 2 seconds & doesn't struggle. Before it was quick at that speed, but kind of disappointing compared to lower speeds. Slight accel without downshift is smooth & noticeable, the torque difference can be felt. Traction is a bit of an issue though. I'm trying to go easy & learn the quirks, plus I restudded my tires last year & kinda want them to last. It's a bit of a learning curve, but I'm also kind of glad I did it in winter, so I'm forced to learn right now instead of next year at first snow. I absolutely cannot wait til spring. I've already told my service advisor we should just order a t-case now, cause I'm pretty sure I'll be needing it. Also told our warranty admin that I have a feeling my t-case will be "evacuating all fluid". I'm also wondering if swapping for my buddies 3.21 axles would help out.

Our strip test & tune days are usually in the middle of the week, so getting there might be a challenge, but I'll try. Gotta get a dyno run in also.

And still on my 5.7 tune. LT headers are on they're way, already got my wideband o2. Then I'll be set.

 

[tidefan1967]

SRT 6.4 & torque converter swap done this past Friday

View attachment 148264

That's awesome! You got to do a full write up for us when you get it finished and on the road. I've seen one other guy do the truck 6.4 but that's small potatoes HP/TQ wise compared to what you're doing. You planning on any performance mods(not that you necessarily need them) and/or running down the drag strip?

 

[KiltedCelt01]

I ordered a carbon fiber interior trim kit from R Vinyl.com. Something happened with the shipping along the way but it showed up last night. This kit comes with enough vinyl to cover pretty much everything in your Ram and you can order just about any color or pattern you want.

It’s a little more than I need, I don’t plan on going crazy with it. Unfortunately, there isn’t an option to order individual pieces/sheets. This makes all the hassle I went through getting the radio bezel covered (twice now) pretty much unnecessary. If only I found this site sooner. Son of a...

I was considering trying to trim a left over roll of carbon fiber vinyl out to cover the console shifter area and now, thankfully, I don’t have to go through that nightmare. I’ll post photos when it’s done if anyone is interested. First impressions are good, everything is precut to exact measurements and appears to be very good quality vinyl.

https://www.rvinyl.com/store


Sent from my iPhone using Tapatalk

 

[ThrashN]

I ordered a carbon fiber interior trim kit from R Vinyl.com. Something happened with the shipping along the way but it showed up last night. This kit comes with enough vinyl to cover pretty much everything in your Ram and you can order just about any color or pattern you want.

It’s a little more than I need, I don’t plan on going crazy with it. Unfortunately, there isn’t an option to order individual pieces/sheets. This makes all the hassle I went through getting the radio bezel covered (twice now) pretty much unnecessary. If only I found this site sooner. Son of a...

I was considering trying to trim a left over roll of carbon fiber vinyl out to cover the console shifter area and now, thankfully, I don’t have to go through that nightmare. I’ll post photos when it’s done if anyone is interested. First impressions are good, everything is precut to exact measurements and appears to be very good quality vinyl.

https://www.rvinyl.com/store


Sent from my iPhone using Tapatalk

Nice. Post pics when installed

 

[corneileous]

Holy crapwagons Batman, that looks like a lotta work. Lol. Definitely post pics when you’re done.


Sent from my iPhone using Tapatalk Pro

 

[mboymopar]

Sat in mine naked and turned my seat fans on

Lol

 

[2010 Infantry Vet]

My buddy swapped out my console shifter for the 8 speed console. Now i need to get a radio bezel to match.

 

[circuitguy]

Just got my new tips in from the powder coat today, they came out great! The new 5" tip on the left and the factory 4" tip on the right. Bunch cheaper then Moe's or Carven. What do you all think?

 

[2010 Infantry Vet]

My buddy swapped out my console shifter for the 8 speed console. Now i need to get a radio bezel to match.

View attachment 148537

 

[AustinHarmon]

Just got my new tips in from the powder coat today, they came out great! The new 5" tip on the left and the factory 4" tip on the right. Bunch cheaper then Moe's or Carven. What do you all think?

View attachment 148549

View attachment 148550

View attachment 148551

Looks good, what brand?


Sent from my iPhone using Tapatalk

 

[circuitguy]

Looks good, what brand?


Sent from my iPhone using Tapatalk

No idea, I have a friend getting these for me and another friend doing the black powder coat finish. Cant wait to get them installed on my Ram.