AlfaOBD

[SitKneelBend]

What's the newest version of Alfa. Mine is 2.1.7.7 from last November. Am I missing something?

Last update was November...

Sent from my HTC U11 using Tapatalk

 

[likes2build]

Thanks, just checking. For a while we were getting a couple of updates a month.

 

[Stlram81]

Does anyone have an extra pins for pin 11 when adding remote start?? I’ve looked all over and it’s back ordered.. I’ll gladly pay you

thank you

https://www.mouser.com/ProductDetail/829-13627884-L?r=829-13627884-L

I just got some from here.

Sent from my SM-G965U using Tapatalk

 

[lmftmf]

Has anyone had issues when they convert from column shift to floor shift with autostick? I changed the configuration option for 4 pos with autostick however when I use the autostick it works for like a second then switches back to D with no number. I can try to toggle it again and it will work for a second (D1) then go back to D with no interaction.

 

[gapi]

Dang IT! Cannot find my OBDLink MX+! Crap! As soon as I buy another it will show up.

So if anyone here has done this and has two lemme get one or please recommend a lower cost known working BT unit?
I'm not gonna buy a MX+ for a while. I have turned every thing I own upside down looking.

Ugh!

 

[SitKneelBend]

Duplicate...

 

[SitKneelBend]

Dang IT! Cannot find my OBDLink MX+! Crap! As soon as I buy another it will show up.

So if anyone here has done this and has two lemme get one or please recommend a lower cost known working BT unit?
I'm not gonna buy a MX+ for a while. I have turned every thing I own upside down looking.

Ugh!

Did you check the OBD port?![emoji6]

This worked for me for everything but mileage correction.

Veepeak Mini Bluetooth OBD2 OBDII EOBD Scanner Adapter Automotive Check Engine Light Diagnostic Code Reader for Android Windows https://www.amazon.com/dp/B011NSX27A/ref=cm_sw_r_cp_apap_K6hXxJpIfgqFB

Sent from my HTC U11 using Tapatalk

 

[gapi]

Thanks. I'll go for it.

 

[Nycatt]

How can I get my PCM version aka calibration id of my truck. I need to give this to Diablo for a Pre-tuned PCM.

 

[Ram7081]

Can someone post how2 setting for front led turn signals (bulbs) please?
I must have done something wrong. The rears (same brand) are good, no warning. But, the fronts are giving a warning.
Thanks

 

[Ramm5.7]

How can I get my PCM version aka calibration id of my truck. I need to give this to Diablo for a Pre-tuned PCM.

Have to pull your pcm out and number is on a sticker on the back.
Just dug through my photos and must have deleted the pic i had of mine

 

[Ramm5.7]

How can I get my PCM version aka calibration id of my truck. I need to give this to Diablo for a Pre-tuned PCM.

 

[gapi]

Can someone post how2 setting for front led turn signals (bulbs) please?
I must have done something wrong. The rears (same brand) are good, no warning. But, the fronts are giving a warning.
Thanks

Did you let them cycle a while? I had some do this and they finally adjusted.

 

[Nycatt]

Have to pull your pcm out and number is on a sticker on the back.
Just dug through my photos and must have deleted the pic i had of mine

which number is it?

 

[Ram7081]

Can someone post how2 setting for front led turn signals (bulbs) please?
I must have done something wrong. The rears (same brand) are good, no warning. But, the fronts are giving a warning.
Thanks

Found it! Fixed.

 

[Ramm5.7]

which number is it?

View attachment 197700

They will tell you when you call but should be these..

 

[SRich2015]

Has anyone had issues when they convert from column shift to floor shift with autostick? I changed the configuration option for 4 pos with autostick however when I use the autostick it works for like a second then switches back to D with no number. I can try to toggle it again and it will work for a second (D1) then go back to D with no interaction.

There is no need for changing anything in the BCM when going from column shifter to console as long as you used the jumper wiring harness. I would set it back to before!!


Sent from my iPhone using Tapatalk

 

[joelmic]

What is with all the "OUTPUT" settings? What are the possibilities? What are the possible FAILS?
i did a search but so far didn't land on the post if it's here...

 

[Denver95327]

Just wanted to say thanks to everyone on here for helping with my remote start! All seems to me working so far.. I defiantly had a huge time delay between the programming and when it actually started to work(5 miles drive included). So, I have another question, I have deactivated my horn when I lock the truck, is there a way to stop the horn from honking when doing remote start? I believe it honks twice.. I’m sure my neighbors wouldn’t like it bright and early. Lol. Thanks again! I’m stoked!

 

[1500ram12]

Just wanted to say thanks to everyone on here for helping with my remote start! All seems to me working so far.. I defiantly had a huge time delay between the programming and when it actually started to work(5 miles drive included). So, I have another question, I have deactivated my horn when I lock the truck, is there a way to stop the horn from honking when doing remote start? I believe it honks twice.. I’m sure my neighbors wouldn’t like it bright and early. Lol. Thanks again! I’m stoked!

If you set the CSM settings you should have access to them in the radio ( it could take up to 48 hour's for them to appear) and you can disable there. I believe in the alfaobd you can also disable it. I'm not sure off hand were exactly it is in alfaobd


2018 Ram 2500 6.4L Hemi Tradesman