Catastrophic Transmission Failure with eBay seller not honoring warranty or returns.

[crackerjack1957]

Alpha can also screw some chit up if not careful.

 

[TheEnder]

Clearly the trans is a POS and who ever rebuilt it did a bad job I would contact ebay stop wasting your time yank it and send it even if you get it to work probly wont last long.

OOOR Sell it and buy a hemi

That’s what i was seriously considering.


Sent from my iPhone using Tapatalk

 

[Burla]

Send it back, take your **** to a transmission shop, that's all I got brother.

 

[PoMansRam]

Is it bad when you loose focus as soon as trannys are mentioned? Asking for a friend..

 

[LoadedExpressRam]

Alpha can also screw some chit up if not careful.

So your thinking alphas quicklearn or relearn could be the culprit? Im asking because im thinking of upgrading my 65rfe VB to the sonnax one and was wanting to use alpha as my relearn tool.

 

[TheEnder]

Is it bad when you loose focus as soon as trannys are mentioned? Asking for a friend..

LOL


Sent from my iPhone using Tapatalk

 

[TheEnder]

So your thinking alphas quicklearn or relearn could be the culprit? Im asking because im thinking of upgrading my 65rfe VB to the sonnax one and was wanting to use alpha as my relearn tool.

No, i don’t think it has anything to do with alfa.


Sent from my iPhone using Tapatalk

 

[Hemi395]

I'm sure you've probably looked at this already but does the main trans connector have any bent or corroded pins?

 

[TheEnder]

I'm sure you've probably looked at this already but does the main trans connector have any bent or corroded pins?

Nope, and the codes stayed the same with 2 different solenoid packs, although, with the white solenoid pack the codes except for 882 appeared twice.


Sent from my iPhone using Tapatalk

 

[TheEnder]

Just gonna leave this here..


Sent from my iPhone using Tapatalk

 

[crackerjack1957]

So your thinking alphas quicklearn or relearn could be the culprit? Im asking because im thinking of upgrading my 65rfe VB to the sonnax one and was wanting to use alpha as my relearn tool.

Not saying it is but you can change things with alpha that can cause havoc......that's why saving screenshots of data before changes are recommended to reverse just in case.
Otherwise you have to have original oem flash by dealership.

 

[TheEnder]

Issue fixed. It was a shorted solenoid pack.


Sent from my iPhone using Tapatalk

 

[ric221]

Glad you got it figured out and working correctly

 

[TheEnder]

Glad you got it figured out and working correctly

Me too! Thank you.


Sent from my iPhone using Tapatalk

 

[LoadedExpressRam]

Shows how much i know. I thought there was only one solenoid pack and that's attached to the VB which in turn is plugged into the main wiring harness. Glad you got it worked out. Hope there was no other damage while you were correcting their mistake.

 

[Hemi395]

Issue fixed. It was a shorted solenoid pack.


Sent from my iPhone using Tapatalk

That's great!!

Which solenoid pack was shorted? I thought you had switched them at one point?

 

[Dodge 1500 4X4]

Thats great what a group, many minds together can fix just about everything!!!

 

[TheEnder]

That's great!!

Which solenoid pack was shorted? I thought you had switched them at one point?

It was the 2nd gear clutch pressure sensor, shorted on both. I replaced it with another gray sp and it worked fine. Hoping it didn’t do any damage and that the metal in the pan was from the break in, but it’s shifting fine, not overheating, and it’s providing weirdly good gas mileage (25MPG) at 55.


Sent from my iPhone using Tapatalk

 

[TheEnder]

Thats great what a group, many minds together can fix just about everything!!!

I know right, love everyone here. It’s great.


Sent from my iPhone using Tapatalk

 

[TheEnder]

Oh yeah, forgot to mention this. The seller is reinstating my warranty.


Sent from my iPhone using Tapatalk