BeardedContractor
Junior Member
Attached are the logs. I looked at them and couldn't see anything odd, but then again I am not experienced with this.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I’m sure Roman217 may comment also, but I compared your BCM to mine using Notepad++. Other than the normal things that are different, you have diesel, I have gas, etc. I have a BigHorn and you have at least a Laramie (Longhorn?) with those goodies, nothing stood out as different that may cause your issue. When I added the UAQ, I did SDAR as you did which I noticed, but I thought there was another activation but I don’t specifically recall it as I did mine some time ago. My seats work and yours don’t, and I wasn’t much help. .
I just did HSM: they are different. I have not run either either number to know if there is a difference, but my settings, etc., work just fine. Maybe this will help you out. Good Luck!
Yours:
ECU serial number:
ECU Part Number: 68217268AD
Hardware number: 68217268AD
Hardware Supplier Identification: Continental
Software Logical Block Supplier Identification: Continental
Mine:
ECU serial number:
ECU Part number: 68217263AE
Hardware number: 68217263AE
Hardware Supplier Identification: Continental
Software Logical Block Supplier Identification: Continental
Thanks, I looked up both part numbers. Yours is a later revision and it looks like my part number is only used in the 2016 Ram from what I can see, but your was used in multiple years. 68217268AF is the latest revision that says it is compatible so I am going to try that I guess. Found it for about $75.
Thanks, I looked up both part numbers. Yours is a later revision and it looks like my part number is only used in the 2016 Ram from what I can see, but your was used in multiple years. 68217268AF is the latest revision that says it is compatible so I am going to try that I guess. Found it for about $75.
Looking for insight here... have a 15 1500 sport (Canadian truck in US) have went from 8.4 non nav to 8.4 nav and now UAQ without any issues, but the camera app icons are not appearing in the app screen to be able to drag down into main bottom row. I have it in the typical spot in controls, but wondering why I cant get it to show in apps. When i had the 8.4 nav I purposely used an older sw version to be able to have that, worked fine, but not doing it with UAQ which was out of a 17 ram. All other features work even after updating the UAQ sw from 18 something to the 22.6. Now even more curious as I see in beardedcontractors pics they have the camera split into two icons... I would love that! I do have the tailgate cam and the third brake light chmsl oem cam (waiting on kaodtech for a long time to have inventory on the harness) just not wired in, but from what I know that does not come into this reasoning. I have alfaobd and well versed in it, no luck with turning stuff off and back on etc. Anyone have insight on why?
I am unsure if this is a navigation or not, appears to be a UCS. Anybody know of any issues with this particular radio?
View attachment 236452
That appears to be a 2019/2020 ram classic Canadian UCS non-nav radio based on several sites I've found.Finally able to pick a part from the wreckers, found a 2018 radio, VIN says it’s a 2018 Ram on the software update page, I have the media hub and connector coming, I’ll install the radio on Saturday, I hope it works. I am unsure if this is a navigation or not, appears to be a UCS. Anybody know of any issues with this particular radio?
View attachment 236451
View attachment 236452
That’s what I was thinking, even with my current nav, I find myself still using google maps on my phone lol!I don't believe that has the built-in navigation, it would have the part # of: 68331631A* (the * changes per revision).
Google Maps and/or Waze is a lot better than the built-in navigation except it doesn't do the EVIC turn-by-turn, but I wouldn't loose any sleep over not having it(especially if you got a good deal).
I’ll let you know if it worksThat appears to be a 2019/2020 ram classic Canadian UCS non-nav radio based on several sites I've found.
2019/2020 RAM classic Canadian 8.4 UCS non-nav
68340153ak.
M² Mods.
Mine's showing the same ... and I know there is new firmware out there. Not sure what to do with it. There is FW available on this site, but it gives me concern that Uconnect says "no update".
If your not trying to resolve a problem or add a new feature then don't upgrade the firmware.... and I know there is new firmware out there. Not sure what to do with it.
I am not sure what this refers to that the EVIC won't show turn by turn. My 2019 UAS unit in my 2018 does. Is it something to do with Canadian units? Just wondering. ThanksI don't believe that has the built-in navigation, it would have the part # of: 68331631A* (the * changes per revision).
Google Maps and/or Waze is a lot better than the built-in navigation except it doesn't do the EVIC turn-by-turn, but I wouldn't loose any sleep over not having it(especially if you got a good deal).
So your saying that your UAS while using Android Auto/Car Play turn by turn shows up in EVIC where you normally see the speedometer?I am not sure what this refers to that the EVIC won't show turn by turn. My 2019 UAS unit in my 2018 does. Is it something to do with Canadian units? Just wondering.