Went to the local Lund Boat Dealer, today, and not only did they have my parts
but I found a Raised, Chrome, LUND Decal/Lettering, that would fit perfectly,
in that little space, above my slider rear window.
Yeah, Me!
OEM Hitch Receiver flat out is horrible.
Every insert, the pin rattles around, in a hole too large for it.
Insert is pulled or pushed by whatever is being towed,
making all kinds of noise.
AND the insert also raises up, over bumps, inside the receiver
which is too large for the insert, every insert I've tried.
Pith Poor Workmanship &/or Tolerances.
Amazonion Gods to the Rescue
Worked like a charm. Pulled boat all over and quiet as the Fishing Gods intended.
The worst part, of this receiver, is the safety chain holes.
Located, 3 & 3/4 inches, behind, the receiver opening itself
and tucked, way up, underneath the bumper.
Seriously?
Come on, Mopar Designers. torture your Mechanics with goofy design but not the End User.
Hopefully, these Hooks I added will makes things easier on my arthritic joints.
There it is, Still 3 & 3/4 inches back.
Except it will move, a bit, and be easier to get hooks on and off than through those tiny opening, which cannot be seen, except by ants.
I appreciate work by Braille, as much as the net guy, but not when playing Twister
little bit of Red Loc-tite and they should never come apart
First person I ever met, who says they design for Cars,
think I'm going to deliver a Hay Maker, that'd be the envy of Mike Tyson,
right into the Jewels, just for Fun. Don't care where or when.
.