Search results

  1. Hemi_Express2013

    Cam/ Lifter failure?

    So, after taking a break from all of the build stuff. Been a couple years. My girl is hurt. 2013 30,500 miles. 5w20 RL oil changed twice a year regardless. In her defense, she's pulled hundreds of WOT runs. She's been airborne and sideways at 90mph. Few other things I'm sure I'm forgetting. She...
  2. Hemi_Express2013

    True Street Performance- Hemituner Nag-Ram 1st ever

    https://m.facebook.com/207460799268060/photos/a.207464755934331.60219.207460799268060/1285964494751013/?type=3&source=48&refid=17&_ft_=top_level_post_id.493680237489671%3Atl_objid.493680237489671&__tn__=E...
  3. Hemi_Express2013

    EGR Monitor!

    We all know that the 4th Gen have no egr valve. Everytime I have my truck inspected, the egr monitor shows up on their equipment with a "not ready" status. Shouldn't it say "not supported". What does your inspection report say under this monitor, "ready", " not ready" or "not supported". Can...
  4. Hemi_Express2013

    4.56 conversion parts list...

    So, I've been researching parts for my 4.56 gear install this fall. Kinda confusing to say the least, not to mention expensive. Rear end was the easy part. I've read greychevy build with his truck several times over on DodgeTalk, looked at his pics. Still confused on what parts to get. Here's my...
  5. Hemi_Express2013

    auto upshifts

    Just curious if all Rams do this. . DOES YOUR RAM auto upshift. Meaning put it in autostick 1st, go into WOT, hit the redline, tcm shifts to 2nd, etc? On it's own with no input from the driver? Mine does and I think it's awesome. The perfect shift everytime.
  6. Hemi_Express2013

    Stage 3 double catch can system, no pcv valve

    Has anyone tried this set-up yet? This setup addresses the problem of foul-air-mode by removing the pcv valve from the system such it cannot close down and become a restriction. In effect, it doubles the blow by volume capacity of your CCV system because now when the blow by volume gets high...
  7. Hemi_Express2013

    Endless search!

    So I've been trying to collect fuel injector flow rate data for our trucks. I've been turning up nothing in any search I've done for a few days. Part number# RL037479AC. As far as I can assume, these are flowing 30lbs @ 58psi, 310-315cc min. Right, wrong, anyone have some numbers and source...
  8. Hemi_Express2013

    AMP Ram air hood really works???

    With the weather changing and offering a nice clean asphalt surface to play on, armed with my snap-on sulus ultra, formulas offered by "Green Mamba", decided to give the truck a little 2nd gear romp. After collecting the data and imputting the numbers into the equation, it is clear the Ram air...
  9. Hemi_Express2013

    engine cfm rate...

    Been thinking of getting Moes ported intake manifold if and when they become available. Been doing some base calculations of present cfm usage. Looking for someone to chime in for some comparisons. My engines intake uses on average at wot 311g/s. 311x4=1244gt/s 1244x60=74640qt/min. 7464/...
  10. Hemi_Express2013

    AMP Hood

    Just got my new AMP Ram hood today. Looks great. Can't wait to get it on and functional.
  11. Hemi_Express2013

    EGR not ready?

    So I went to get an inspection on my truck today. FAILED, egr system not ready. Thing is I can't find an egr valve on my truck nor have ever seen one. I'm under the impression the new trucks don't have an egr valve? I don't have any codes, what gives?
  12. Hemi_Express2013

    Vararam crankcase breather

    Need an upgrade to the vararam breather. Suggestions welcome, real life applications preferred. Got any pics?
  13. Hemi_Express2013

    Ever hear of Challenger Fest???

    How 'bout a Ram Fest... Meet and greet, swap meet, battle it out on the track. Nothing but Ram. Anything like that? If there was enough interest, maybe we could get something started. RF1.
  14. Hemi_Express2013

    Is this the new face of Ram?

    OMG, if this is where Fiat is taking our Rams. Well, I'm glad I got my '13. Is it a Toyota, Mustang, Toytang... http://www.autoguide...tly-teased.html
  15. Hemi_Express2013

    Arrington wants your truck

    Found this post today: "We are looking for 2009-2012 Ram 1500 HEMI vehicles in Martinsville VA for tuning evaluation.The trucks must be stock engines with limited to no mods. We can provoide alternate transportation. We will need each vehicle for about 3 business days. Participants in the...
  16. Hemi_Express2013

    Hemi Eagle head flow chart Article...

    Is it a real Hemi? That was the cry nearly 10 years ago when the daring engineers at Chrysler slapped the sacred Hemi slur on the valve covers of their new V8 engine and unceremoniously dropped it into a truck. The trolls on the Web were so busy complaining that they overlooked what has to be...
  17. Hemi_Express2013

    Arrington test mule for forced air.

    Just so you guys know, Arrington is doing a install next week for forced air on a '13 Ram. Hope it all goes well because I will take a place in that line.
  18. Hemi_Express2013

    API Comp Cam VVT 266

    I was gonna keep my mouth closed, but I'm starting to get excited so I gotta share. Got my new Diablosport Trinity today from Moes. Thank you Matt. Your service is the best! So, I've been waiting for a Cam swap. I've been bugging the ears off of Justin at Arrington for a few weeks now. Needless...
  19. Hemi_Express2013

    Anything but Ram '13...

    Warning, if you planned on seriously modding your '13 or newer Ram truck. My only answer to that is, I should have bought a Chevy/ Ford. Good luck with that and let me know when someone is able to figure these freaken trucks out. Doomed, a long road and a hard way to go.
  20. Hemi_Express2013

    '13 Cam Specs

    Thought I'd put this info out there: Intake valves (2.04-2.06in) exhaust (1.55-1.56in). Camshaft intake duration 268degree, Exhaust Duration 290degrees, Overlap 44 degrees. intake opens @28.2 BTDC closes 268 ATDC, Exhaust opens 274.2 BTDC, Closes 15.8 ATDC. Valve lift @ 0 lash intake(.472) and...
  21. Hemi_Express2013

    Diablosport dyno testing ram '13 this week

    All I can say is this is good news... Been waiting, hopefully, the waiting will soon be over...
  22. Hemi_Express2013

    Volant power core

    One of the first mods I did I my truck was to install a Volant CIA system w the ram air snorkel. It has a power core filtration filter, 99.97% efficiency, it's really big, in of itself can be a restriction but really helps to keep the oil clean of contaminates. Since then I have gotten Moes 87mm...
  23. Hemi_Express2013

    Bully dog install

    So I got my Bully Dog hemi plus tuner yesterday. Updated the tuner with tech help because updater couldn't see the sd card. Tech said that happens with reader. Hard wired power cord to fuse box but found out fuse tap was too big to fit Mimi fuse back into it's slot. Ended up just using the bare...
  24. Hemi_Express2013

    Moes 87mm

    Received my 87mm TB from Moes today. It was by far the easiest mod I've ever done. If it took 10 minutes it was only because I was talking to my wife during the install. Took the truck out for an initial run and runs great. I know once the truck learns the knew parameters, it will perform even...
  25. Hemi_Express2013

    Mufflex drone suppression pipe

    Has anyone here used Mufflex Drone suppression pipe(This DODJP sells for $165.00 + Shipping?) knowing that I'm upgrading my muffler, is it worth the effort, any problems, performance issues?

Latest posts

Members online

Total: 1,777 (members: 46, guests: 1,731)
Robots: 1,873

Forum statistics

Threads
195,627
Posts
2,872,718
Members
156,459
Latest member
rileys803

Share this page

Top