amp

  1. Michigan BIGHORN

    12.4" Tesla style veticle touchscreen, amp and subs

    Fits 2011,2012 perfect. Should fit 2013 and up with some trim modifications. Subs fit under rear seat. Everything works perfectly. Traded the truck in and this won't fit my new Rebel. Head unit is the 12.4" verticle touch screen and even comes with the OBDII sensor and front camera. If you've...
  2. Jwilzz

    Removing/Replacing stock alpine amp

    Hello guys appreciate any help you can give. I have a 2012 1500 with the alpine sound system. I've currently replaced my stock head unit with pioneer dmh-wt8600nex. I used the maestro ads-mrr2 interface to retain stock amp and steering wheel controls and all that good stuff. But for some...
  3. Gixxer750

    *New in Box*Audiocontrol D4.800 , DSP , 4/3/2 ch. Amp

    Audiocontrol D4.800 Amp, includes Line out converter, digital signal processor, 30 band graphic EQ, fully adjustable crossover points on all channels including the amp output RCAs, channel summing and time alignments, accepts up to 6 channels of 200w line level inputs or RCA inputs, signal...
  4. Gixxer750

    INTEGRATION-Audiocontrol D4.800 *NIB*

    Seriously, if you have the base 6 speaker this is the way to go to rock that truck! Full DSP built into amp. Tune all channels and RCA out independently. I loved it so much I got the 6.1200 for my Alpine system replacement. I put infinity reference 3032cfx in the dash parallel with Kappa 6.5...
  5. Waterfowler41

    How to: Upgrade the base 6 stereo in 2019+ Rams

    In this video I walk through how I upgraded the base 6 stereo in my Rebel with new speakers, an LC&i LOC, a 5-channel amp, and a 10" subwoofer in a custom box. The video description has lots of helpful links including a link to a share drive where I posted the Ram wiring and stereo installation...
  6. D

    Non alpine stock speaker upgrade 8.4

    Whats up ramheads, ive searched the threads and could not find anything on this: i have a stock radio with an 8.4 uconnect. Ram 16 sport 1500, i have the alpine sub from another ram. The 8 inch. When i checked to see if wires were there.. the harness was there. I plugged it in and got nothing...
  7. R

    I have 2017 ram rt alpine system aftermarket amp and subs

    I hear you have to take a certain route when installing a an amp for subs. How would I go installing a mono amp and subs. I have a lc7i already if that helps and jl jx1000 mono amp Will this harness work...
  8. C

    2019 Base Sound System Upgrade

    I have a 2019 Ram 1500 Classic with the base sound system (non-Alpine). I'm installing a mono amp to power two 12" subs under the rear seats, using a LC7i to get the signal from the rear speakers. I tapped into the RR+/- & LR +/- wires directly behind the head unit for speaker-level inputs...
  9. XLILBEASTX

    The "BIG 3" upgrades? Help plz.

    So i decided I wanted aftermarket subs in my truck. I went with the kicker L7 Q-class subs. The plan is too run 2 4ohm 12's together at 1ohm with a mono block amp pushing 1800 watts RMS. The problem is I know my truck has a 160 amp alternator, and don't know if/how to power this type of amp. I...
  10. W

    Alpine 7 speaker system in 2014 R/T Sport took a dump!

    Need some help... Today, I got in my truck to make a run uptown and to my surprise, the sound coming out of my speakers was really bad! I got out of the truck to check the speakers and found that both 6x9 door speakers weren't working. All the rest were working, but sounded terrible. I checked...
  11. A

    Help! After market AMP keeps shutting off

    Hubby just installed two 12” subs with a 1100W mono block amp. Factory head unit. Everything is wired to the T. Checked and re-checked. He has installed several systems and never had an issue. Installed an in line converter, and a capacitor. Every time the bass hits the amp shuts off. Good...
  12. MajMike

    Question about 5 channel amp . . .

    I was looking at a JBL 4505 5 channel amp at Crutchfield, and have a question for the experienced here. My standard 6 speaker setup has no output to a sub, so the only inputs to the amp would be the speaker wires. My question is this: given all the ways to set up this amp, if I used the low...
  13. continuecrushing

    FS: Amp Power Steps With Plug and Play Harness 2016-2017

    Hey guys/gals, I've got my Amp power steps for sale, in great condition. These running boards came off my truck (2016 2500 crew cab) in place of actual rock sliders. These function MUCH better than what I put on the truck, and they will definitely be missed. This is the kit that includes the...
  14. 17Veteran76

    Bazooka Bass Tube

    I remember my step father had one of those 8 inch bazooka bass tubes in our 01 caravan. Hit pretty hard. Tons of Yanni and some Mexican band los something. We aren't even Mexican. But, it was punchy as hell. I mostly listen to Country/Rock, so I don't need anything that hits hard, and I enjoy...
  15. Drunken Hamster

    My 3 Month Old Kickers Are Crackling! Time For The Real Audio Build; Help Wanted!

    Okay, so lately, I've been noticing my Kicker CS series speakers [stock sizes] are crackling at low volumes and it's irritating, infuriating, and disallowing me to enjoy my music without blasting the **** out of it! They've never been amped, and aside from testing things out, I don't run any of...

Members online

Forum statistics

Threads
195,437
Posts
2,870,248
Members
156,135
Latest member
2023RamWarlock
Top